GE v6 user manual Intrusion Zone Tab, Arm/Disarm By Access Right, Arm/Disarm by Manual Control

Arm/Disarm Intrusion DI: Active/Inactive/Trouble

Readers: Online or Off-Line

Alarm Points: Monitored Off/Monitored On

Arm/Disarm By Access Right

The Intrusion Zones tab of the Access Right Form allows you to assign multiple intrusion zones using an assignment dialog.

•Only badge holders with an Intrusion Zone assigned on the Access Right Form will be able to arm and disarm zones using any of the card/keypad readers within a zone.

•When a zone is armed, all readers within the zone will go offline, and normal access rights will not gain access into the area.

•When a zone is disarmed, all readers within the zone will go on-line and normal access rights will gain access into the area. If schedules were assigned, then the reader will follow the schedule.

If you expect to arm/disarm by using any one of the readers within a zone:

•That reader must be assigned on the Access Right tab of the Access Right Form and be an assigned reader in the Intrusion Zone listed on the Intrusion Zone tab.

OR

•Individually created access rights must be assigned to the person that will arm/disarm the Instrusion Zone. (One right will allow access to the readers and another right will allow access to the Intrusion Zone.)

Arm/Disarm by Manual Control

Manual zone control for arming and disarming is accomplished using the Intrusion Zone tab on the Manual Control Form. This follows the standard Manual Control Form conventions including a Purpose entry by the operator.

Intrusion Zone Tab

Reference Topic:

Intrusion Zone Form

Intrusion Zone Assignment Dialog Box

Access Right Form

This tab allows you to assign intrusion zone control to previously created access rights. Access to a reader and access to an intrusion zone are two separate access rights. Only badge holders with an Arm/Disarm Intrusion Zone access right will be able to arm and disarm zones by accessing a card/keypad reader within a zone. When a zone is armed, all readers within that zone go off-line; therefore, normal access rights will not gain access into the area.

Assigned Intrusion Zones: This windowpane displays a list of previously assigned intrusion zones for the currently selected access right record.

Assign Intrusion Zone: Click this button to display the Intrusion Zone Assignment dialog box, allowing you to assign and unassign intrusion zones to the selected access right. If no intrusion zones display, verify that intrusion zones were configured on the Intrusion Zone Form.

If you do not have valid access to a reader that belongs to an Intrusion Zone due to a schedule in that access right, you will not be able to arm/disarm a zone.

Secure Perfect 6.1.1 User Manual 187