Alarm Graphics Viewer

The drop-down displays a list of available digital outputs.

•Link to more than one alarm: Allows you to link more than one physical alarm or DI/DO point to the point you are creating on this map. This button label changes based on the type of point that you are configuring. The icon that will display for the group reflects the most severe alarm in the group.

•Camera: Select a camera from the drop-down list to link live video access from a map. (This setting is not available if the assigned Point Type is a Digital Input or Digital Output.)

Icons for this point:

Select an appropriate icon to represent the alarm state. An alarm in reset condition is low severity. An alarm in alarm condition is medium severity. An alarm in trouble condition is high severity.

•Trouble: Select the icon you want to display when this alarm point is in a trouble condition (short or cut). Click the drop-down list to display a list of currently available icons. You may add more icons by clicking Add New Icon to Database. (This setting does not display if the Point Type is Digital Output.)

•Alarm: Select the icon you want to display when this alarm point is in an alarm condition. Click the drop-down list to display a list of currently available icons. You may add more icons by clicking Add New Icon to Database.

-This setting label changes to Set if the assigned Point Type is a Digital Input.

-This setting label changes to Active if the assigned Point Type is a Digital Output.

•Inactive: Select the icon you want to display when this point is in a reset condition. Click the drop-down list to display a list of currently available icons. You may add more icons by clicking Add New Icon to Database.

•Add New Icon to Database: Click to import your own icon files to the list of available icons used in the previous three fields to represent a specific alarm state.

You can navigate between the Alarm Monitor Form and Alarm Graphics by clicking the right mouse button.