GE v6 Settings to Reach Micro Tab, Show Me Demo Files, Sort Fields Dialog, Retry Interval 30 sec

Retry Interval (30 sec)

Enter the number (from 1 to 9) of 30-second intervals that the micro will wait in between each dial to the host. For example, if you specify 2, then the micro will wait: 2 x 30 = 60 seconds between each dial to the host.

Settings to Reach Micro Tab

Micro Form

This tab will display ONLY when you are configuring a dial-up, head-of-line micro. Use this tab to configure how the host dials the micro.

Phone Numbers to Reach Micro

Enter the telephone number of up to 20 digits, that the host dials to call the micro. If an outside line must be accessed in order to dial out, type a comma after the number that accesses the outside line, (typically 9). In this situation, if the telephone number to be dialed is 1-555-666-7777, enter the number in this field as follows: 9,15556667777

The micro will first dial the number in Number 1: and then try the number in Number 2:.

All telephone number fields must contain a telephone number. If there is only one telephone number for the micro, enter this number in all fields.

Dial Interval

Select the interval (None, 1 hour, 8 hours, 12 hours, 24 hours) at which the host will automatically dial the micro. The host will dial one hour from the time the micro went into an idle (no activity) state. If this is a new record, the count begins once the record is saved. If the Secure Perfect system is shut down, the count begins once Secure Perfect is started.

Same Number Retries

Enter the number of times (from 0 to 9) the host should redial the same telephone number before moving on to the next available telephone number.

Retry Interval (30 sec)

Enter the number (from 1 to 9) of 30-second intervals that the host will wait in between each dial to the micro. For example, if you specify 2, then the host will wait: 2 x 30 = 60 seconds between each dial to the host.

Host Call Back

Select this check box if you want the host computer to return a call back to the micro, providing additional validation that the correct host-to-micro communication has taken place.

Show Me Demo Files

Reference Topic:

Index of Show Me Demo Files

If this graphic is displayed in a topic, click the Show me icon to view a step-by-step animated demo that may assist you in performing the tasks described in the related fields. The demo files are in English only. There is a short pause as the demo begins.

Sort Fields Dialog

This dialog box allows you to select fields by which to sort the information on a given report. The window lists the fields available for the current report. If you want to sort by more than one field, hold the Control key while you left-click the additional fields.

Secure Perfect 6.1.1 User Manual 248