GE v6 user manual Filters Tab Badge Report Form, Filters Tab Device Report Form

Filters Tab - Badge Report Form

This tab is used only when generating a Badge Report. Use this tab to select the criteria by which this report will be generated.

•Badge Number: Select the range of badge numbers you want to display on the report. If you want to list all badges, leave these fields blank.

•Badge status: To provide additional filtering, you can also select to list only those badges assigned a selected status.

Filters Tab - Device Report Form

This tab is used only when generating a Device Report. Filter or select specific information you want to display on the report.

Device: From the drop-down list, select a device that you want to use to generate report information. If you want to use all, select <ALL>.

The following exceptions apply:

•If a Camera or Digital Video Recorder was selected as Report Type on the General tab, the Device drop-down list fills with DVRs only.

•If Alarm – API Connections is selected as Report Type on the General tab, the drop-down list contains only <ALL>.

For all other Report Types, the list fills with micros.

Filters Tab - DI History Report Form

Use this tab to select or limit the criteria by which this report will be generated.

•DI State: Select the state of this DI as Set, Reset, Open, or Short. If you want to use all DI states, select <ALL>.

•Micro: Select the micro you want to use to generate report information. If you want to use all micros, select <ALL>.

•DI Type: Select the DI type as Alarm, Elevator, or Inactive. If you want to use all DI types, select <ALL>.

•DI Description: Enter the range of device descriptions on which you want to report. Leave blank for all descriptions.

•Micro Description: Enter the range of micro descriptions on which you want to report. Leave blank for all descriptions.

Filters Tab - Operator History Report Form

Use this tab to select the criteria by which this report will be generated.

•Activity Type: Enable the activity types on which you want to run the report.

•Login Name: Select the operator you want to use to generate report information. If you want to use all operators, select <ALL>.

•Form Name: Select the forms you want to use to generate report information. If you want to use all forms, select <ALL

Secure Perfect 6.1.1 User Manual 169