Schedules/Events, Enable/Disable, Turn do On/Off, Do control

Schedule Tab

Digital Input Form

This tab is available only if you have selected Digital Output in the Type field on the Digital Input Tab.

Use this tab to assign a schedule. Time schedules define intervals which include a start AND an end time for different days of the week and modes.

Time schedule

Click the drop-down list to select a previously created time schedule.

Enable/Disable

•Select Enable if you want to enable this digital input when this time schedule starts. Enabling the digital input allows it to then trigger the associated digital output when a state change occurs.

•Select Disable if you want to disable this digital input when this time schedule starts. Disabling the digital input prevents the state change from being reported and the associated digital output from triggering.

Schedule Tab

Digital Output Form

Use this tab to define schedules for turning digital outputs (DO) on or off. Time schedules define intervals that include a start AND an end time for different days of the week and modes. At the start of the schedule, the state of the DO changes to the scheduled value. At the end of the schedule, the state of the DO returns to the nonscheduled value.

Example: If the DO is scheduled On, the DO will return to Off at the end of the schedule.

Turn DO On/Off

•Time Schedule: Select a time schedule from the drop-down list. This determines when the DO will automatically turn on and off.

•On/Off: Select On if the above schedule is when you want the digital output to be in the Active state or Off if the above schedule is when you do not want the digital output to be in the Active state.

Schedule Tab

Digital Output Group Form

Use this tab to define schedules for turning all digital outputs in a selected digital output group on or off.

DO control

•Time schedule: Select a time schedule from the drop-down list.

•On/Off: Select On if the above schedule is when you want the digital outputs in the selected digital output group to be in the Active state. Select Off if the above schedule is when you do not want the digital outputs in the selected digital output group to be in the Active state.