Profile Commands, Show Profiles | Eicon Networks 2440 specification

Profile Commands

PROFILE profileName

Changes the active context to the specified profile. If no name is specified, you are placed in the General context. If you are in the Filter context and no name is specified, you are returned to the profile you came from.

profileName

Name of an existing profile (ATM-1 or LAN for example).

SHOW PROFILES

Valid context: General, Profile, Port

Displays the configuration settings for all profiles.

SET PROFILE NAME name

Valid context: PROFILE

Changes the name of the current profile.

name

New name for the profile. The name must not contain spaces.

ENABLE PROFILE

DISABLE PROFILE

Valid context: Profile

Enables/disables the current profile.

CONNECT

DISCONNECT

Valid context: Profile

Connects/disconnects the current profile. Use these commands so that changes to ATM or ADSL settings take effect.

SET PROFILE TYPE IPoA PPPoA PPPoE

Valid context: Profile

Changes the connection type for the current profile. The options are:

IPoA	IP over ADSL

PPPoA	PPP over ADSL

PPPoE	PPP over Ethernet

IPoE	IP over Ethernet (bridged ADSL)

Command Line Reference

Page 82

Image 82

Contents

Diva 2440 Adsl Router User’s Guide Second Edition June 206-378-02 Contents Index Introduction How Adsl Works Hardware Features General FeaturesAdsl and Network Features Introducing the Diva 2440 Adsl Router Package Contents One Computer Connection ScenariosTwo Computers at Once More than Two Computers Adsl line Diva Splitters and ‘Splitterless’ Operation How Adsl WorksMicrofilters Setup About Microfilters Technical Support Overview Connecting to Both PortsRequirements Internet Account Information Ports and Indicator Lights Ports Indicator Lights Power Light Adsl Cable Notes Connect the CablesEthernet Cable Notes USB Cable Notes Updating or reinstalling USB driversTo continue Access the Diva 2440 Web Interface Complete the Internet Wizard Link Setup Complete Optional Installing the Diva Assistant Setup Connecting a Second Computer LAN Setup About the Ethernet Cable Built-in Dhcp Server General Setup ProcedureUsing the Diva Assistant to set on a LAN IP Addressing If your LAN uses Static IP Addresses Adjusting LAN SettingsIf your LAN has a Dhcp Server If your LAN has a router Configuring TCP/IP TCP/IP SetupInstalling TCP/IP Windows 95/98 Windows NT Windows Verifying TCP/IP SettingsApple Macintosh Mac OS 8 or later Setup Troubleshooting Browser Settings Connecting a Phone to the Pass-through Phone Port Connecting a Microfilter About Microfilters Technical Support Upgrading Firmware General Information Resetting the DeviceAbout the Diva Assistant General Information Reset Settings to Factory Defaults Resetting the DeviceNormal Reset Boot Mode Starting the Web-based Configuration Interface Procedure ‘Reset’ and other buttons on the Main Menu Editing Settings Pages Backing up the current configuration Configurations Saving, Restoring, and ResettingAccessing the Configuration Restoring a configuration from a file Upgrading Firmware Backing up Configuration FilesOpening to the Firmware Maintenance Retrieving Firmware from the Eicon Networks Web Site Using your Diva Defining a password Login Password and other Security FeaturesLogin Password Erasing the system password IP Filtering Security Level Automatic Log OutNetwork Address Translation Launching the Diva Assistant About the Diva AssistantGeneral Tab Performance Tab Diagnostic Log TabTools Tab Advanced Topics Diva Requirements Setting up a VPN with Windows 95/98Virtual Private Networking Instructions Advanced Topics Setting up a VPN with Windows Connecting the VPN Security benefits Network Address TranslationHow It Works NAT static mappings Specifying a Default NAT Server Creating Static NAT Mappings ‘Default NAT Server’ field Diva Establishing a Telnet Connection Command Line Interface CLIPrerequisites Using the CLI Command Line Reference Uploading/downloading configuration files Using Tftp to Transfer FilesEnabling Tftp server support Loading New firmware via Tftp ExamplesRetrieving message.txt Command Line Reference Cancel Notational Conventions SET Adsl Modulation Type G9922 Multimode Adsl CommandsShow Adsl Configuration Show Adsl Statistics SET ATM Service Category UBR CBR ATM CommandsShow ATM Configuration Show ATM VC Dhcp Commands Ipaddress IP address of the Wins server Primary Wins serverSecondary Wins server Domain Domain name, a string of up to 31 characters Delete Dhcp Staticmap ipaddress Ipaddress IP address of the entry to enable or disableIpaddress IP address of the entry to delete Show Dhcp Staticmap Show Ethernet Statistics Ethernet CommandsShow Ethernet Address Number Number of the filter that is to be deleted Filter CommandsNumber Position where new filter is to be added Number Number of the filter to edit Discard the data Filter applies to both incoming and outgoing data defaultNumber Number of the filter to copy Forward the data to the next filter Applies to UDP data Applied to TCP data defaultApplies to all data Applies to TCP connection SYN data Macaddress Source or destination MAC address Enable Ethernet multicast filteringDisable Ethernet multicast filtering Type Hexidecimal number indicating type of Ethernet frame General Commands Hours Range 00 to Minutes Seconds Enable Echo Server Disable Echo Server ResetReset Factory Enable Sysman Disable Sysman IP Commands General Show Statistics Ping ipaddress number size IP Routing Commands Show IP Route Enable all module messages Logging and Internal Trace CommandsTaskName Module name as seen in Show LOG. Examples Dhcp UDP or TCP protocol NAT Network Address Translation CommandsEnable NAT Disable NAT Show IP NAT PPP Commands Value Range 0-2147483647. Default Enable PPP Phase Logging Disable PPP Phase Logging Value Range 0-2147483647 milliseconds. DefaultEnable PPP Echo Request Disable PPP Echo Request Enable PPP FSM Logging Disable PPP FSM Logging SET PPP Local Username SET PPP Local Password Show PPP Configuration Show Profiles Profile CommandsEnable Profile Disable Profile Connect Disconnect Index Index of the VC taken from the SAR VC table SAR CommandsShow SAR Configuration Show SAR VC index Tftp Commands Enable Tftp Server Disable Tftp Server Show Timeprotocol Configuration Time Protocol CommandsEnable Timeprotocol Disable Timeprotocol TimeServer Address of the time server Regulatory Information for Canada SpecificationsThis Section Specifications General Specifications Software and Firmware Specifications Declaration of Conformity Regulatory Information for the United StatesFCC Part 68 Notice Safety Notice Regulatory Information for Canada Regulatory Information for the European Union Safety Status TNV-3Power Consumption EU Declaration of Conformity Index Index