3.Select ‘Microsoft VPN Adapter’ as the device.

Note: If you do not see ‘Microsoft VPN Adapter’ as an option, make sure the VPN adapter is installed on your system.

4.Click ‘Next’. You will see the following dialog box.

5.Enter the IP address or host name of the VPN server in the ‘Host name or IP Address’ field.

6.Click ‘Next’, then click ‘Finish’.

To connect to the VPN, double-click the connection you just created. When prompted, enter your user name and password and click ‘Connect’. You will see a Dial-Up Networking dialog box, showing the details of your connection.

Note: The bps value reported by this dialog box is your LAN Ethernet speed.

Advanced Topics

Page 49

Page 49
Image 49
Eicon Networks 2440 manual Advanced Topics