Eicon Networks 2440 Software and Firmware Specifications

Specifications and Regulatory Information Page 88

Software and Firmware Specifications

Installation Features

• Easy access to configuration pages via a web browser

• Auto detection of common problems (connection not possible, incorrect configuration, etc.)

Administration Features

• Web-based interface (accessed via a web browser)

• Command line interface (accessed via Telnet)

• File configuration (accessed via TFTP)

• Diva Assistant (Windows only) accessible from system tray

• Password protection (Web and CLI)

• Simple firmware upgrade procedure (via Web, CLI, and Diva Assistant)

• Configuration update and backup to local drive (via web, CLI, and Diva Assistant)

ADSL Features

• Full-rate (G.992.1 and T1.413 Issue 2), providing a maximum of 8 Mbps downstream and 820

Kbps upstream (can be used with or without a splitter)

• G.Lite (G.992.2), providing a maximum of 1.5 Mbps downstream and 512 Kbps upstream

(can be used with or without a splitter)

• Splitterless operation may require the use of microfilters for analog devices using the same

wiring as the ADSL modem

• G.994.1 (G.hs) (DSL handshaking)

• ANSI T1.413 Issue 2 compliant

• Interleaved and fast-path ADSL channels

• Interoperable with ITU and ANSI standards-based DSLAM

IP Services

• IP, IP over Ethernet, IP over IEEE 802 Networks

• DHCP server

• TFTP client and server

• Telnet server

• HTTP server

Security

•IP Filtering

• Ethernet Filtering

• Password protection

ATM Features

• AAL5 (ATM Adaptation Layer 5)

• VC Multiplexed

• LLC Encapsulation

• UNI 3.0, 3.1

• F4/F5 OAM Cells (ATM Loopback)

• Precise Peak Cell Rate Traffic Shaping on a per VC basis

• Up to 8 active VCs

• VPI Address Range 0-255

• VCI Address Range 0-65535

• UBR/CBR

Contents

Main Second Edition (June 2001) 206-378-02 Contents Command Line Reference...........................................................................60 Specifications and Regulatory Information...............................................86 Page Introducing the Diva 2440 ADSL Router General Features ADSL and Network Features Hardware Features Packag e Content s Connection Scenarios One Computer Two Computers atOnce More than Two Computers How ADSL Works Splitters and Splitterless Operation Microfilters Setup Overview Connecting to Both Ports Requirements Internet Account Information Ports and Indicator Lights Ports Indicator Lights Step 1: Connect the Cables ADSL Cable Notes Ethernet Cable Notes USB Cable Notes Updating or reinstalling USB drivers To continue Step 2: Access the Diva 2440 Web Interface Step 3: Complete the Internet Wizard Page Optional: Installing the Diva Assistant Page Connecting a Second Computer LAN Setup About the Ethernet Cable General Setup Procedure Built-in DHCP Server Using the Diva Assistant to set on a LAN IP Addressing Adjusting LAN Settings TCP/IP Setup Windows 95/98 Configuring TCP/IP Windows NT 4.0 Configuring TCP/IP Windows 2000 Apple Macintosh (Mac OS 8 or later) Page Troubleshooting Browser Settings Connecting a Phone to the Pass-through Phone Port About Microfilters Connecting a Microfilter Page Using your Diva 2440 General Information Resetting the Device Normal Reset Reset Settings to Factory Defaults Boot Mode Starting the Web-based Configuration Interface Procedure Reset and other buttons on the Main Menu Editing Settings Pages Configurations Saving, Restoring, and Resetting Upgrading Firmware Backing up Configuration Files Opening to the Firmware Maintenance Page Retrieving Firmware from the Eicon Networks Web Site Uploading New Firmware Page Login Password and other Security Features Login Password Automatic Log Out IP Filtering Security Level Network Address Translation About the Diva Assistant Launching the Diva Assistant General Tab Performance Tab Tools Tab Diagnostic Log Tab Page Virtual Private Networking Setting up a VPN with Windows 95/98 Page Setting up a VPN with Windows 2000 Connecting the VPN Network Address Translation Notes Security benefits NAT static mappings How It Works Creating Static NAT Mappings Page Example: Allowing Web or FTP Request using NAT Static Mappings Command Line Interface (CLI) Prerequisites Establishing a Telnet Connection Using the CLI Command Line Reference Using TFTP to Transfer Files Prerequisites Enabling TFTP server support Uploading/downloading configuration files Examples Command Line Reference Overview Notational Conventions ADSL Commands ATM Commands DHCP Commands Page <ipaddress> IP address of the entry to delete. <ipaddress> IP address of the entry to enable or disable. Page Filter Commands <number> Position where new filter is to be added. <number> Number of the filter to edit. <number> Position where new filter is to be added. <number> Number of the filter that is to be deleted. Page Page Page General Commands Page IP Commands (General) Page IP Routing Commands Logging and Internal Trace Commands taskName A module name (as seen in SHOW LOG). Examples: DHCP. ALL Enable all module messages. hostAddr IP address of the remote device (only required when enabling). NAT (Network Address Translation) Commands Use DELETE IP NAT to remove the NAT assignment. PPP Commands Page Page Profile Commands SAR Commands <index> Index of the VC taken from the SAR VC table. TFTP Commands Time Protocol Commands Page Specifications General Specifications Packaging Contents Hardware Features LED Status Indicators Software and Firmware Specifications Installation Features Administration Features ADSL Features IP Services Regulatory Information for the United States Declaration of Conformity FCC Part 68 Notice Safety Notice Regulatory Information for Canada Safety Notice Regulatory Information for the European Union EU Declaration of Conformity Index A C D E