Eicon Networks 2440 Regulatory Information for the United States

Specifications and Regulatory Information Page 89

Regulatory Information for the United States

Warning: Changes or modifications to this unit not expressly approved by Eicon Networks Corporation

could void the user's authority to operate the equipment.

We:

Eicon Networks Corporation

2155 Chenault Drive, Suite 503

Carrollton, Texas USA 75006

1-800-80-EICON

(972) 417-5500

Fax: (972) 417-5610

Declare under our sole legal responsibility that the products liste d below to which this

declaration relates, are in conformity with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. T his equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance wi th

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, whic h can be

determined by turning the equipment off and on, the user is encourage d to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

This unit complies with Part 68 of the FCC rules. On the bottom of this equipment is a label that

contains, among other information, the FCC registration number. If requested, this information

must be provided to the telephone company.

An FCC compliant telephone cord and modular plug is provided with this equipment, designed

to be connected to the telephone network or premises wiring using a comp atible modular jack

which is Part 68 compliant.

This equipment cannot be used on telephone company-provided coin ser vice. Connection to

party line service is subject to state tariffs.