Eicon Networks 2440 manual PPP Commands, Value Range 0-2147483647. Default

PPP Commands

SET PPP MRU <value>

Valid context: Profile

Defines the initial Maximum Receive Unit (MRU) the local PPP entity will advertise to the remote entity. If set to 0, the local PPP entity will not advertise any MRU to the remote entity, and the default MRU will be assumed. Takes effect when the link is next restarted (use the DISCONNECT and CONNECT commands).

<value>

Range: 0-2147483647. Default: 1500.

SET PPP RESTARTDELAY <value>

Valid context: Profile

Defines the number of milliseconds to wait before retransmitting another configure request when no valid response has been received. Takes effect on the next connection.

<value>

Range: 0-2147483647. Default: 3000.

SET PPP MAX CONFIGURE <value>

Valid context: Profile

Defines the number of configure requests to transmit before considering the link faulty. Takes effect on the next connection.

<value>

Range: 0-2147483647. Default: 10.

SET PPP MAX TERMINATE <value>

Valid context: Profile

Defines the number of terminate requests to transmit before going down when no response is received. Takes effect on the next connection.

<value>

Range: 0-2147483647. Default: 2.

SET PPP MAX FAILURE <value>

Valid context: Profile

Defines the number of identical ‘Configure NAK’ messages to send before rejecting an option. Takes effect on the next connection.

<value>

Range: 0-2147483647. Default: 5.

Command Line Reference Page 79