USB Cable Notes
•USB requires Windows 98, Windows 2000, or Windows Millennium Edition. USB will not work with Windows 95 or Apple Macintosh computers.
•Once the power and USB cables are connected, Windows will request driver files. Follow the onscreen instructions, as described below.
Windows 98 1. Insert the Diva
2.From the ‘Hardware Wizard’ window, click ‘Next’.
3.Select the option ‘Search for the best driver’, then click ‘Next’.
4.When asked for the location of the driver files, select ‘Specify a location’ and clear all other options. In the ‘Location’ field, type in D:\USB\WIN98 (with ‘D’ being the letter of your
5.Once the driver is located, click ‘Next’ to begin installation.
6.When installation is complete, click ‘Finish’.
Windows Me 1. Insert the Diva
2.Select ‘Specify the location of the driver’, then click ‘Next’.
3.For the location, type in D:\USB\WIN98 (with ‘D’ being the letter of your
4.When installation is complete, click ‘Finish’.
Windows 2000 1. Insert the Diva
2.Click ‘Next’.
3.Select ‘Search for a suitable driver’, then click ‘Next’.
4.When asked for the location of the driver files, select ‘Specify a location’ and clear all other options. In the ‘Location’ field, type in D:\USB\WIN98 (with ‘D’ being the letter of your
5.Once the driver is located, click ‘Next’ to begin installation.
6.When installation is complete, click ‘Finish’.
Updating or reinstalling USB drivers
If you must reinstall or update the USB drivers, follow the instructions below.
7.From your desktop,
8.
9.Click the ‘Drivers’ tab and click ‘Update Driver’. Follow the onscreen instructions. You will asked to insert your Windows Installation Disk, and you will also need the new USB drivers. The drivers are also located in the USB folder on the Diva
Note: This procedure may vary according to the Operating System installed.
To continue
See Step 2: Access the Diva 2440 Web Interface on page 18.
Setup | Page 17 |
