Reader Tab

 

Reference Topics:

 

Read and Keypad-Type Reader

 

Keypad Only Type Reader

 

Normal Type Reader

Reader Form

 

 

This tab contains the basic information about the reader.

 

Element

Description

 

Micro

This is a read-only field. The description of the micro that controls this reader.

 

Board

This is a read-only field. The default description is in the format: mmmm-b Board

 

 

Type where mmmm represents the micro number to which this reader is associated, b

 

represents the board number, and Board Type represents the reader board.

 

 

For example, 0001—1 8RP would be the reader on micro one, 8RP board one.

 

Number

This is a read-only field. The number of the reader (For a Micro/5-PX: 1 to 16; for a

 

 

Micro/PX-2000: 1 to 4). The number corresponds to where the reader is connected on

 

the micro. See the Micro/5 Installation Guide or Micro/PX-2000 and Micro/PXN-2000

 

Installation Guide for more information.

 

Model

There are three options; select:

 

 

CASI-RUSCO Supervised if using a CASI-RUSCO supervised reader such as the

 

94x or 97x series proximity readers set for supervised F/2F.

 

 

CASI-RUSCO 440/445 if using a CASI-RUSCO Model 440, Model 445, or Model

 

910.

 

 

Other if using a reader that does not fit into the above categories.

 

Status

Online: This field is automatically enabled when this reader record is created. An

 

 

online reader will accept a valid card read and unlock a door, provided it is one of the

 

licensed active readers. You also have the option to schedule a reader off-line. When

 

the reader is off-line, the reader will not accept valid card reads, will not unlock a door,

 

and transactions display on the Activity Monitor as Invalid.

 

 

Active: This field is automatically selected and allows the accepting of badge

 

 

transactions when this reader record is created. The number of active readers counts

 

against your reader limit, as defined by your software license. For example, if your

 

 

license key allows the use of 64 readers, you may have only 64 readers marked as

 

 

Active.

 

Physical

Normal: This reader requires only a valid badge to gain access.

 

type

Badge and Keypad: This reader requires a valid badge and a valid number (PIN)

 

 

entered on the keypad to gain access.

 

 

Badge or Keypad: This reader requires you to enter either a valid badge number on

Logical type

the keypad or a valid badge to gain access.

 

Normal: Allows as many successive accesses as needed, as long as the badge

 

is valid.

 

 

APB in: Anti-passback in. This type of reader (which gives an IN status) is used

 

to enter an area. This reader will not release a door a second time until that

 

 

badge is presented to an APB out reader connected to the same micro or, if you

 

selected Enable global APB on the Settings Tab of the Parameters Form, a

 

 

different micro. All micros are updated.

 

 

APB out: Anti-passback out. This type of reader (which gives an OUT status) is

 

used to leave an area. This reader will not release a door a second time until that

 

badge is presented to an APB in reader connected to the same micro or, if you

 

selected Enable global APB on the Settings Tab of the Parameters Form, a

 

 

different micro. All micros are updated.

 

 

Secure Perfect Global Edition: You must configure this reader as APB if you

 

plan to include this reader in a Region APB configuration. Only designated APB

 

 

reader types display for selection on the Region Form.

 

 

 

Secure Perfect 6.1.1 User Manual

227

Page 229
Image 229
GE v6 user manual Reader Tab, Read and Keypad-Type Reader, Model, Physical, Logical type