GE v6 user manual Micros, Elevator Form, Micro Form Completion Records Generation

Elevator Form

Reference Topics:

Overview

Setting Up an Elevator

Elevator Tab

Floor/Digital Output Tab

Floor/Digital Output/Digital Input Tab

Use this form to create or modify an elevator record.

For a shortcut menu to related forms, move the mouse pointer below the tab and click the right mouse button.

Elevator control does not span micros. This means the reader, digital outputs, and digital inputs (if applicable) must be on the same micro.

Description

To locate and view existing records, click Search. A list of records will display. You can search and view or edit an existing record.

Micros

Overview

Reference Topics:

Micro Form Completion

Records Generation

Micros

Micro records can be created within Secure Perfect without having the micros attached and configured. Additional device records can be configured after creating micro records.

Micros control access through the use of devices such as badge readers, alarm points, and output points physically wired to the micro, which is then connected to the host by one of the following methods:

1.Directly

2.Using RS-232 cabling through a modem

3.Through a network

Secure Perfect provides a micro auto-configuration feature, allowing you to set up the database with the exact board configuration that you selected during the micro configuration process. When you create a micro record, only those records for the associated devices (readers, alarms, alarm groups, and digital outputs) supported by the micro’s configuration are created. The auto-configuration feature anticipates your configuration requirements. For example, the Micro/PX2000 is a single-board microcontroller. Other boards do not display for selection, as shown in the image below. This board address is 2.

Secure Perfect 6.1.1 User Manual 48