Sanyo VPC-E1414 Using the Setup Menu, Setting Sounds, Setting Power Save, To go to Setup Menu

Page 58

Using the Setup Menu

You can access the Setup menu whether you are in Record or Playback mode.

The Setup menu allows to configure general camera settings.

To go to Setup Menu:

1.Press Menu button to launch the Record/Playback Menu.

2.Use the or keys to switch the menu tab to Setup menu.

3.Use the or keys to move through the menu selections.

4.To select an item, press the OK button or key.

5.Change the submenu settings using the 4-way navigation control.

6.Press the OK button to save and apply settings.

Setting Sounds

Use the Sound menu functions to control the sounds produced by the camera.

1.From the Setup menu, select Sounds.

2.Adjusts sound settings.

3.Press the OK button to apply changes.

	Item			Available Settings			Description
	Item			Available Settings			Description

	Startup			Sound 1, Sound 2,			Selects the startup sound when camera is turned on.
	Startup			Sound 3, Off			Selects the startup sound when camera is turned on.
				Sound 3, Off

	Shutter						Enables or disables shutter sound when Shutter button is
	Shutter		On, Off				pressed. Shutter sound is not available when recording videos
							or voice clips.
	Beep			0-4			Adjusts volume.
	volume			0-4			Adjusts volume.
	volume

Setting Power Save

The Power Save function allows you to set an idle time after which the camera automatically sets to sleep mode to save power. After a minute of being in sleep mode, the camera eventually turns off power.

This function is not available in the following instances:

•Recording a video or audio file

•Playing a slideshow/video/audio file

•Using the USB connector

57

Image 58

Contents VPC-E1414 Table of Contents Playback Menu Preface Safety and Handling PrecautionsAbout this Manual Safety Instructions For EU Users For American UsersFor Canadian Users Or other reproductive harmCanadian ICES-003 Information FCC InformationDeclaration of Conformity Trademark InformationSymbols Used in this Manual Battery InformationSystem Requirements Main FeaturesIntroduction For WindowsPackage Contents Front View Flash Self-timer LED AF Assist Lamp Lens MicrophoneCamera Views Back ViewBottom View Tripod screw hole Battery/Memory card compartmentCamera Buttons Left/Right ViewNavigation Control Getting Started Attach the Camera Strap Inserting the BatteryCamera Memory Inserting an SD/SDHC Memory Card Close and lock the battery/memory card compartmentTo remove the SD/SDHC card Initial Settings Turning the Power On and OffModes Photo Mode Screen Layout Using the LCD monitorLCD Monitor Layout Movie Mode Screen Layout Standby layout Recording LayoutPlayback mode display of still images Playback Mode Screen LayoutFile no./Total no File Playback mode of videosDisplays the date and time of the video clip Playback mode of audio clips Changing the LCD Monitor Display Recording Images, Videos and VoicesTaking Images Setting the Zoom Control Using the StabilizerZoom buttons To set the Focus mode Using FlashSetting the Focus Mode To activate FlashPhoto Size Using the Function MenuMy Mode Menu Options Menu barQuality EV CompensationWhite Balance Flash FluorescentColor Mode MeteringSetting the Scene Mode Using the Record MenuRecord Menu Intelligent Scene Table below shows the available scene mode settingsSpeed and aperture values Off-kilter exposure or blurringAuction FoodCapturing text images Foliage Patterns to select for usage of auction Smile CaptureUsing Sports Mode Using Intelligent SceneUsing Kids Mode To activate Intelligent SceneUsing Food Mode Using Party ModeUsing Soft Skin mode Using Foliage ModeUsing Auction Mode Auction mode provides 4 kinds of pattern as follow Using Smile Capture ModeUsing Blink Detection Mode Select Save image to save or Cancel to disregardUsing Love Portrait Using Pre-composition ModeUsing Self Portrait Using Aperture Priority Mode Using HDR ModeUsing Fisheye Lens Mode Original Fisheye LensUsing Manual Exposure Using Voices RecordingUsing Shutter Priority Mode Displays the shutter valueOff Captures an image without time delay 10 Sec Setting the Drive ModeTo set the Drive Mode SecSetting the AF Area Setting the AEBSetting the AF Lamp To set Sharpness Setting SharpnessSetting Saturation To set SaturationTo set Contrast Setting ContrastSetting the Digital Zoom To set Digital ZoomRecording Videos Setting the Date StampSetting Auto Review To set Date StampWhite Balance, Metering, Color Mode Settings of Recording VideosInternet Mode Movie SizePre-Record PlaybackViewing in Single Navigation Display the icon in red while turning Pre-Record onViewing Thumbnails To set 9-images modeTo set calendar mode Scroll barZooming images For 320 x 240 resolution images, you can only zoom in up toSet the camera to Playback mode Playing VideosPlaying Voice Recording Volume cannot be adjusted during Pause modeVolume cannot be adjusted when you pause the voice memo Playing Voice MemoPlayback Menu Using the Delete ButtonDeleting an Image/Video/Audio DeleteTo delete attached voice memo To delete a single fileTo delete all files Slide Show ProtectTo protect all files To protect/unprotect multiple filesTo unlock all files To activate Red-eye Correction Red-eye CorrectionVoice Memo To record voice memoTo activate Color Mode Trim To trim an imageStartup Image ResizeTo resize an image To set Dpof To reset DpofRadial Blur To set Dpof on a single image/all imagesSetting Power Save Using the Setup MenuSetting Sounds To go to Setup MenuSetting Language Setting LCD SaveSetting Date & Time Setting File NumberingSetting Battery Type Setting TV OutSetting LCD Brightness Setting Memory KitConnecting the Camera to a PC Reset AllConnecting the Camera to a TV Making Connections61 Repeat the same steps 2 to 4, then enter printer settings Connecting the Camera to a PrinterSetting the Print Mode Menu To set Print SelectTo set Printer Settings Start PrintingAbout Folder and File Names TroubleshootingAppendix CameraSpecifications TV system Battery LifeDimensions MicrophoneKeep the devices out of the reach of children Do not use during a stormDo not disassemble or modify Do not use while driving Be aware of your surroundings when using the cameraDo not use where there is risk of explosion Do not get the camera wetDo not break the LCD monitor or lens Do not hold the hot part for a long timeDo not cover or wrap the camera in a cloth or blanket Operating environmentDo not touch the power cord plug with wet hands Concerning the power cordDo not damage the power cord Do not get the docking station or AC adaptor/charger wetOther cautions 71Spew battery fluid Battery type and danger levelBattery fluid, or smoke fumes Use only batteries manufactured By SanyoUse the battery pack only Specified device Do not throw the battery Fire or subject it to heatDo not peel or damage the outer Casing Disposal of and recycling Battery Insert the battery correctly, as IndicatedCharge the battery pack before Using it UseStorage temperature -10 to 30C 14 to 86F Humidity 10 to 90% no condensationCoreCore When not using the camera for a long periodRemove the dirt with a soft cloth PurchasedIf the battery temperature rises further while