Yamaha Soavo-1 owner manual Bi-wired connections, When using a banana plug

<Bi-wired connections>

To connect the speaker to the output terminals of the amplifier, two pairs of cables for each of the woofer and the tweeter/mid-range are used instead of standard connections. This type of connection decreases the modulation distortion caused by electric resistance of the cables and driving current of the speakers. Consequently, purer sound quality can be expected.

When your amplifier has only one set of speaker output terminals.

Amplifier

SPEAKERS

RL

When your amplifier has two sets of speaker output terminals.

Both SPEAKERS A and B

should be selected.

Amplifier

SPEAKERS

RL

A

+ – – +

To utilize bi-wired connections,	+	–	–	+
remove the jumper cables from the
terminals first, and then connect the
woofer and the tweeter/mid-range
to the amplifier separately using two
pairs of cables.

B

Soavo-1 (R)	Soavo-1 (L)	Soavo-1 (R)	Soavo-1 (L)
Remove the jumper
cables before		Tweeter/Mid-range
connecting.
		terminals
Jumper	Black (–)	Red (+)
cable

Woofer terminals

When using a banana plug

1	Unscrew the terminal knob.	3
2	Remove the cover by pulling it toward you.	4
	2
	1

Tighten the terminal knob.

Simply insert the banana plug into the terminal.

4 3

Banana plug

4En