Chapter 3 - Configurations
3.5Local mode
A camera head with the LDK 5860 TriaxHD adapter can be used in the local mode. The DC power supply is applied to the adapter. An OCP 400 operational control panel can be connected directly to the camera using the RS232 connection. A reference signal can be applied to genlock the camera.
Standard and WorldCam versions
The HD SDI (B) / VF connector at the rear carries the HD SDI viewfinder signal. The HD SDI (A) connector carries the HD SDI camera signal.
SportCam version
The HD SDI (A) and HD SDI (B) / VF connectors at the rear carry the HD SDI viewfinder signal. An HD SDI camera signal output is not available.
Figure 3-5. Camera in local mode
Reference
in
Camera head + Triax adapter
Video out
RS232 connection
DC power
in
OCP 400
LDK 8000 HDTV camera system User’s Guide (v3.0) | 33 |