Chapter 2 - Installation
2.9Attaching an adapter
The camera head is a
Caution
Be extremely careful with the connectors between the camera head and the adapter. Do not allow the guide pins to damage the pins of the connector. Follow these steps in the order given. Tightening or loosening the screws in the wrong order could result in mechanical damage to the camera.
To attach an adapter to the camera proceed as follow:
1.Fit the guide pin at the top rear of the camera head and the guide pins on either side of the camera connector into the corresponding slots (1 and 2) of the adapter.
2.First, tighten the two horizontal screws (3) on the top of camera.
3.Next, tighten the two horizontal screws (4) at the front of the camera.
4.Lastly, tighten the vertical screw (5) in the handle of the camera.
To detach an adapter from the camera head follow the steps for attaching it in the reverse order.
Figure 2-10. Attaching an adapter
5 | 1 |
3 |
4 |
2 |
28 | LDK 8000 HDTV camera system User’s Guide (v3.0) |