RCA LDK 8000 manual Access control, Camera card slot, PIN code

Page 70

Chapter 5 - Operating instructions

5.11.2 Access control

The owner’s card or the PIN code is used to access special set-up and security features of the camera. Inserting the owner’s card into the associated camera always gives direct access to the Security menu (PIN code is not required). If you select the Security menu without this card inserted, you must enter the correct PIN code to gain access to this menu.

PIN code

The PIN code of the camera can be viewed and changed in the Security menu. The camera's PIN code when it leaves the factory is set to 0000. It is strongly advised that this code be changed by the owner on receipt of the camera. This ensures added protection against unaurthorised access to the Security menu.

5.11.3 Camera card slot

Insert your camera card into this slot with the chip on the card facing the front of the camera. Push the card home until it fits snugly. A camera card is not required for normal operation of the camera.

Figure 5-14. Camera card slot

☞

☞

Note

Only use an original camera card. Store the owner’s card in a safe place.

Note

An LDK 8000 SportCam will only read LDK 8000 SportCam cards.

70	LDK 8000 HDTV camera system User’s Guide (v3.0)

Image 70

Contents LDK 8000 Hdtv camera system Standard version WorldCam version SportCam versionCopyright Declaration of ConformityFCC Class a Statement TrademarksTable of contents Operating instructions Menu structure and contents LDK 8000 Hdtv camera system User’s Guide End-of-life product recycling Important information LDK 8000 Hdtv camera system User’s Guide Triax cable systems Galvanic separationBase Station earthing Precautions Mains lead wiring for UK usersHD sensors IntroductionTechnology Digital processingFocus assist Film-like characteristicsStandard version Advanced TriaxHD features TriaxHD Base Station FeaturesSuperXPander TriaxHD high-speed Base StationIntroduction Accessories Installation Packing/unpackingTransport case Transport caseMounting a lens 2-inch viewfinder Mounting viewfinder and microphone holderPositioning the viewfinder Viewfinder positioningWide angle eyepiece Viewfinder accessoriesLeft eye adapter Mounting a microphone Microphone mountingTripod adapter plate Adjusting the shoulder pad Shoulder padAttaching an adapter 10. Attaching an adapterConfigurations TriaxHD modeMultiple TriaxHD cameras with C2IP network Multiple HD cameras with C2IP network controlCamera with TriaxHD adapter and SuperXpander Camera with SuperXpander and TriaxHD adapterSportCam with high-speed Base Station Standard and WorldCam versions Local modeSportCam version Triax cable lengths Camera head controls and connectors Location of controlsCamera head controls front-left Camera head controls TriaxHD adapter controls and connectors TriaxHD adapter controlsTriaxHD adapter connector location Viewfinder controls and indicators Viewfinder controlsOperating instructions Using the cameraSwitching on the power Controlling the cameraSystem Menu Entering the System menuFinding your way Main menuMaking changes Leaving the System MenuUndoing changes Front Assigning functions to buttonsSide panel LensLDK 8000 Standard version Video acquisition modesLDK 8000 SportCam version LDK 8000 WorldCam version Viewfinder picture quality Tally indicatorsViewfinder preferences Video level indicationViewfinder markers FocussingAuto iris Lens preferencesLens type Extended irisLens indicators in the viewfinder Precision focusStandard settings Video preferencesTest signal Gain selectionOptical filter selection Symbol GainVariable gain Colour temperature selection Selecting the colour temperatureVariable colour temperature Auto-white balanceAwhite OK 3700K Exposure time Selecting the exposure timeShooting screens Clean scanVertical shift V-shift Black stretch Reverse scanAuto skin detail Powering the camera Controls on the TriaxHD adapterViewfinder display signal Selecting monitoring signalsOutput monitoring signal Using audio Audio channelAudio channel Intercom headset volume controls Production intercom volume control selectionIntercom microphone routing switch IntercomCall button Tracker tally signalCommunication Data channelOperator files Managing filesScene files Standard filesCustomer standard files Disable cameraUser levels Selecting the user levelScene files Access and SecurityCamera cards Operator filesCamera card slot Access controlPIN code Menu structure and contents VF menu structure Lens menu structure Video menu structure ARDInstall menu structure Triax version File menu structure Refer to the next chapter for the menu contents Diagnostics menu structureService menu structure Security menu structureMenu contents Indicator shows the zoom range of the lens Lens menu Lens menu Values Description Level FileVideo menu Video menu user Values Description Level FileNAM Menu structure and contents Menu structure and contents Install menu Install user Values Description Level FileTurns high-pass filter for audio channel 1 on SW1 PROD, ENG Files menu Files menu user Values Description LevelSecurity menu Security menu user Values Description Level FileDiagnostics menu Diagnostics menu user Values Description Level FileDisplays the firmware status of the selected Service menu Service menu user Values Description Level FileMenu structure and contents Connectors Camera connectorsViewfinder connector 2 VF/Mon connectorAudio microphone connector Lens connector5 RS232 serial connector Connectors on the TriaxHD adapter HD SDI B connector Triax connectorViewfinder / External video output connector HD SDI a connectorAudio microphone 2 connector Audio microphone 1 connectorIntercom headset connector Script light power supply socket DC power input socketDC power and tally output socket Input voltage must not exceed +17 VdcTeleprompter output / Reference input connector Tracker communications connectorAuxiliary connector 18. Auxiliary connector104 Specifications Specifications for LDKSpecifications for LDK 5860 TriaxHD adapter Dimensions Dimensions108