Enable or disable | Press and hold the Voice button while |
Voice Guidance and | sliding the Power switch into the On |
commands | position.. You will hear ”Voice on” when |
| you enable and ”Voice off” when you |
| disable the voice features.. |
|
|
Reset to factory | Turn on the FREEWAY and press and |
default | hold the Answer/end, Voice and |
| Mute button together for about 6 |
| seconds.. When the FREEWAY is reset |
| it will automatically go into pairing |
| mode.. |
|
|
Night driving mode | When powered on you can tap the |
| Vol- and Vol+ simultaneously to |
| disable the LED’s.. And again to enable |
| them again.. The LED’s will be enabled |
| every time you reconnect or power on |
| the FREEWAY.. |
|
|
Download Firmware updates and additional languages
Go to jabra..com/freeway and download the latest firmware and additional languages..
TROUBLESHOOTING & FAQ
I hear crackling noises
-Bluetooth is a radio technology, which means it is sensitive to objects between the speakerphone and the connected device.. It is designed for the speakerphone and the connected device to be used within 33 feet (10 meters) of each other, with no major objects in the way (walls, etc..)..
I cannot hear anything in my speakerphone
-Increase the volume in the speakerphone..
-Ensure that the speakerphone is paired to a device that is playing..
-Make sure your phone is connected to the speakerphone by tapping the Answer/End button..
JABRA FREEWAY | 15 |