PAIRING IT WITH YOUR PHONE/DEVICE
Speakerphones are connected to mobile phones using a procedure called ‘pairing’.. By following a few simple steps, a phone can be paired with a speakerphone in a matter of seconds..
1Activate Bluetooth® on your phone/device
2Turn the Jabra FREEWAY on
3The first time you turn the FREEWAY on it will automatically enter into pairing mode.. The Answer/end button will flash with a blue light and you will be voice guided through the pairing process.. If you have disabled voice guidance go to the Bluetooth® settings menu on your phone/device and search for new Bluetooth® devices.. Choose Jabra FREEWAY..
4When pairing is complete you will hear ”Connected”.. You are now ready to start using your Jabra FREEWAY..
NOTE: If asked for a passkey or pin code use 0000 (four zeros)
CONNECTIVITY
MobilSurf
BLUETOOTH
Infrared port Wap options Synchronization Networks
SELECT
DEVICES FOUND
Jabra FREEWAY
SELECT
Jabra FREEWAY
Passkey:
****
OK
HANDSFREE
Jabra FREEWAY added.
The handsfree is now ready for use
SELECT
PAIR A NEW OR SECOND DEVICE
1Ensure that the Jabra FREEWAY is turned on
2Tap the Voice button.. You will be asked to ”Say a command”
3Say ”Pair new device” and follow the instructions
4If this is your second device you will need to reconnect to the first device afterwards
JABRA FREEWAY | 6 |