GETTING STARTED
You should follow three steps before using your speakerphone:
1Charge your Speakerphone using the supplied USB cable and car charger (approximately 2 hours)
2Activate Bluetooth® on your phone or device (refer to the manual of your device)
3Pair your speakerphone to your phone or device
The first time you turn your Jabra FREEWAY on you will hear Voice Guidance telling you what to do..
NOTE: Voice Guidance and Voice commands are enabled as the default setting when you turn on your Jabra FREEWAY the first time.. You can at any time disable both by pressing the Voice button while you slide the power switch into the On position.. You will hear ”Voice off” and FREEWAY will no longer talk to you or listen for commands.. Repeat the process to enable the voice features again..
CHARGE YOUR SPEAKERPHONE
Make sure that your speakerphone is fully charged before you start using it.. Use the USB cable to connect Jabra FREEWAY to the car charger.. Plug the car charger into your car’s power outlet.. The charging indicator light will light up in red while charging.. When the Jabra FREEWAY is fully charged the indicator light will turn off.. A full charge takes approximately two hours..
Jabra FREEWAY can be charged outside your car using the USB cable..
JABRA FREEWAY | 4 |