Camera Portability, Polaris Handpiece Storing

INSTALLATION

Notes: Authorized Imaging Software, such as VISIX, supplied by the dealer or other company, must be installed on the computer in order to operate the Polaris System.

A Microsoft® Driver Not Signed statement may appear. If it does, click Continue to proceed with installation.

USB Device Driver Installation - Before connecting the Polaris System to your computer or attempting to use it for the first time, run the Setup program on the Polaris System Drivers and Utilities Disk included with the Polaris System. The supplied CD provides the device drivers needed to communicate between the Polaris System and the associated user-supplied USB streaming video software application installed on the PC computer system. This must be completed before the Polaris System will operate properly. Normally, this program runs automatically when the CD is inserted into the drive for the first time. If not, run the setup program located in the root directory of the CD (typically D:\Polaris.exe).

Install the Standard Device Drivers by selecting Standard (default option) from the Setup program menu. If full device functionality is not present after the Standard Device Drivers are installed, the Legacy Device Drivers may need to be installed. More information can be found in the Installation Instructions and Notes file on the Polaris System Drivers and Utilities Disk included with the system..

CAMERA PORTABILITY

Do not twist or turn the Handpiece Cable connector. The connector is keyed and mates straight on with Camera Handpiece connector.

CAUTION: Always handle the Polaris Handpiece carefully. Do not drop and make sure to protect the optical window from scratches.

The Polaris Camera Handpiece quickly detaches

Camera

from the Handpiece Cable and is easily

Connector Key

Handpiece

carried among patient operatories for use

Detaching Handpiece

with additional Polaris Camera System Control

Modules. Refer to the corresponding illustrations

and transport the Camera Handpiece as follows:

1.. Retract collar of quick disconnect

Handpiece Cable

connector

and

Camera

Quick Disconnect

simultaneously pull

straight from

the

Handpiece

Collar

Handpiece connector..

Connecting Handpiece

2.. Release connector quick disconnect

collar..

Handpiece

3.. Store the Handpiece Cable by placing

Handpiece

cable slide holder into the Handpiece

Holder..

Holder

4.. Transport Handpiece to next operatory..

Quick Disconnect

5.. Connect Handpiece at new location

Connector

by aligning the connector key with

Handpiece

the keyway of the mating Handpiece

Cable

Cable connector.

Handpiece

Cable

6.. Insert straight into Handpiece connector

& Cable

Only

until it securely snaps into place..