Powering Your Camcorder (continued)
Using the Optional RCA DCC05 Car Cord Adapter/Charger
The optional RCA DCC05 DC car cord adapter/charger allows you to power your camcorder from the cigarette lighter socket of a car, truck, or RV. It converts 24- and
Consult the installation and operating instructions enclosed with the DCC05 for complete operating instructions.
Cautions: The DCC05 is designed to be used only with vehicles having negative ground electrical systems.
Do not use any other RCA car cord with this camcorder. Other RCA car cords may damage your camcorder.
Using the RCA DCC05 Car Cord Adapter/ Charger to Power the Camcorder
|
|
| POWER |
|
| . ADJ | OPEN |
| DATE/TIME |
| |
|
|
| |
| . RES |
|
|
MEM | COUNTER |
|
|
Using the RCA DCC05 Car Cord Adapter/Charger to Charge the Battery
REC
START/
STOP
POWER ON
SAVE
DC IN 6.5V
1.If the battery is attached to the camcorder or car cord adapter/charger, remove it.
2.Plug one end of the DC power cord into the DC OUT jack on the car cord adapter/charger and the other end into the DC IN 6.5 V jack on the back of the camcorder.
3.Insert the plug on the DCC05 into the vehicle’s cigarette lighter socket. If the car cord is properly attached, the POWER indicator on the DCC05 will light.
1.If the DC power cord is attached to the car cord adapter/charger, remove it.
2.Attach the battery to the car cord adapter/charger as shown.
3.Insert the plug on the DCC05 into the vehicle’s cigarette lighter socket. If the car cord and battery are properly attached, the POWER and CHARGE indicators on the DCC05 will light.
Note: Use the REFRESH feature on the adapter/charger to maximize the life of your battery.
19