Playback on a TV (or VCR) Using the Antenna Connection
To connect your camcorder to a TV using the antenna connection, you will need the RF output adapter and coaxial RF cable that came packed with your camcorder. If your TV is already connected to a VCR, you can attach the camcorder to the VCR and watch what the camcorder is recording or playing on the TV.
COUNTERMEM
RES.
ADJ. | DATE/TIME |
|
PULL
The unauthorized recording of television programs and other recorded material may infringe the rights of others.
VHF
IN
FROM
ANT
2 OR
Back of TV or VCR
VHF
| . |
| F.FWD |
| REW |
FOCUS |
|
| PLAY |
ON | STOP |
| |
OFF |
|
| . |
| SEL |
+ | MODELOCK |
AUTO | |
– |
|
MANUAL | FOCUS |
|
Output Jacks (Located behind door)
BATTERY
CHANNEL 4CH/3CH Switch 
Coaxial RF Cable (supplied)
Back of TV
VHF Antenna
3 RF Output | 1 | OR |
Adapter |
|
|
(supplied) |
|
|
Optional 300/75 | VHF Antenna | |
Ohm Transformer |
|
|
(such as 193983) |
|
|
Installation
1Disconnect the VHF antenna from your TV (or VCR). Connect the antenna to the VHF IN connector on the RF output adapter if you are going to leave the adapter connected to the TV (or VCR).
Note: If your VHF antenna is the flat
2Attach one end of the coaxial RF cable to the VHF OUT connector on the adapter and attach the other end to the VHF input on your TV (or VCR) as shown.
3Attach the RF output adapter’s plug to the output jacks located behind the door on the side of the camcorder as shown above.
32