First-Time Operation
(continued from previous page)
2. Attach the adapter/charger.
To AC
50/60 Hz
DC In Jack
Adapter/
Charger
DC Cable
DC OUT
Jack
Since the battery must be charged before it can be used the first time, attach the adapter/charger to the camcorder.
•Connect one end of the DC cable to the DC OUT jack on the adapter/charger.
•Connect the other end of the DC cable to the DC in jack on the camcorder as shown above.
•Plug the adapter/charger’s plug into an operating outlet.
3. Adjust the handstrap to fit your hand.
LENS
COVER
Control
Handstrap
Handstrap Velcro Strip (Under Flap)
•Lift the flap on the handstrap and separate the velcro strip.
•Insert your hand, adjust the strap to fit snugly, refasten the strap, and close the flap.
4. Rotate LENS COVER control to open lens cover.
4