Videocassettes
Make sure you select good quality tapes for your camcorder. Use of poor quality tapes or tapes that have been damaged or mishandled can contaminate the video heads, resulting in a snowy picture or no picture at all during playback. Because there is no control over the type of tape purchased or rented by consumers, head cleaning is not covered under warranty. It is considered normal maintenance.
Erase Protection – Safety Tab
You can use your videocassettes over and over again. To erase a previous recording, just record over it.
Safety
Tab
A. Remove safety tab or
slide tab to
REC OFF.
B. Cover hole
with vinyl tape or slide tab to REC ON to record over tape.
Recording and Playback Speeds and Times
The camcorder records and plays back in standard speed (SP) or extended play (SLP). Select the recording speed by pressing and holding the SP/SLP button. The selected speed is displayed on the LCD monitor or in the viewfinder. Listed below are the maximum SP and SLP recording times for popular
•SP – Standard play provides the best picture (less picture noise), but the shortest recording time
(20 minutes with a
•SLP – Extended play provides three times the recording time as SP (60 minutes with a
Recording Time
Cassette SP SLP
22