Playback
Use the Cassette Adapter (Continued)
Load Detector
4.Gently close the cassette compartment lid until it locks into place. Make sure the cassette reel area under the adapter is free to turn while the cassette is loading.
Note: You should hear a whirring sound while the tape loads. The adapter’s load detector will automatically retract into the adapter.
Caution: If the load detector is still extending from the side of the cassette adapter after you have attempted to load the cassette, loading is not complete. Try to load the cassette again. Attempting to insert the cassette adapter into a VCR with the load detector extending may cause damage to the adapter and/or VCR.
Remove Cassette from Cassette Adapter
Access Hole
Reels
Caution: Do not touch the reels during loading and unloading. It could cause injury or damage the cassette adapter or tape.
1.Slide the adapter’s EJECT switch to the right. The load detector extends from the side and the whirring sound indicates the tape is being released before the adapter’s cassette compartment lid opens.
2.Use the access hole on the bottom of the adapter to push the cassette up and remove it from the adapter.
3.Gently close the adapter’s cassette compartment lid.
61