@Attach the wh te plug on one end of the audiofvide, b cable to the AUDIO IN jack on the,W,or VCR.
IN jacks, attach the
MONO. If one of
1.A. Camcorder c0n&ted directly to TV monitor: jTu$ on the TV and tune it to its videQ input channel.
2.Press and hold t e $a11 button on the camcorder’s PO
02 Attach the yellow plug on the same end of the audio/video cable to the VIDEO IN jack on the TV or VCR.
03 Attach the yellow plug on the other end of the audio/video cable to the yellow VIDEO jack and the white plug to the white AUDIO jack on the side of the camcorder.
0 |
|
4 Place the AV OUTIIN switch/to OUT. | |
Tapes on a VCR | _J _” i |
|
sliding it to VCR. Insert the cassette you want to playback (or copy).
Note: The camcorder can only play back tapes recorded at the SP speed.
3.Press PLAY on the camcorder. To copy what the camcorder is playing, place a blank cassette in the VCR and start the VCR recording. Adjust the tracking on the camcorder if necessary. Details are on page 51.
• During playback, use the playback features described on page 51.
4.Press STOPJEJECT when you are finished.
Watching What Ithe’Capcorder is Seeing or Recording on the TV
1.A. Camcorder c nn&ted directly to
TV: Turn on 4the $V, and tune it to its video inpu k chpnnel.
B.Camcorder c nne$ted to VCR that is already co necfed to TV: Turn
on VCR and ilack it in the “line” or “camera” mo e . (If your VCR does not have a “ii e” br “camer$‘.+..
mode, consul the! VCk owner’? manual.) Op rat{~ the ?‘V as you normally do t set the’ signal
coming from he VCR.
:
I
2. Press and hold the small button on the camcorder’s POWER switch while sliding it to CAMERA. Insert the cassette you want to record on.
Note: When the camcorder is used as a camera, turn the TV’s volume down to prevent a
3.Press the camcorder’s RECIPAUSE butt& to begin recording. You can watch what the camcorder is seeing or recording on the TV screen.
53
I’