Keep dust and grit from entering the camcorder’s cassette door. Dust and grit are abrasive and cause excessive wear to both the camcorder’s recording and playback heads and cassettes.
Before handling your camcorder, make sure your hands and face are free from any chemical products such as suntan lotion, as it may damage the finish.
Do not touch the lens with your fingers! The oil from your skin may damage the lens. To clean the lens, blow it with a blower brush, and gently wipe it with a
To clean the camcorder’s exterior, remove any power source. Gently wipe the camcorder with a clean soft cloth.
Use of strong or abrasive cleaning products, such as those containing alcohol or benzine, may damage the camcorder.
The camcorder can be damaged by improper storage or handling. Do not subject the camcorder to swinging, shaking, or dropping.
Do not store the camcorder in temperatures below
60
Do not aim your camcorder at the sun or other bright objects or leave your camcorder in direct sunlight. Doing so could permanently damage the camcorder’s internal parts.
Avoid operating your camcorder after moving it from a cold location to a warm location. Moisture may cause the tape to stick to the headwheel and damage the headwheel or tape. Give the camcorder 2 to 3 hours to reach a stable temperature before inserting a cassette.
Do not operate or leave your camcorder in extremely humid environments.
Do not operate the camcorder for extended periods in temperatures below 40*F (4QC) or above 95F (35*C).
Do not expose the camcorder or adapter/charger to rain or moisture. If either component becomes wet, turn off the power and take the unit to an Authorized RCA Camcorder Servicenter.
Retain the original carton for future storage or shipping purposes.
When the camcorder is not in use, always remove the cassette and AC adapter/ charger or battery.
Always replace the lens cap on the lens when the camcorder is not in use.