Sanyo VPC-T1496 manual EN-47

3. If you select [Single] in the previous step, the
figure shown on the right hand side will appear.
Select the image that you want to print with
the e / f buttons.
Select the print number (up to 99) with the c
/ d buttons.
After selecting the desired image and
printing number, press the SET button to	;	;
confirm.
4. Select [Exit] with the c / d buttons, and press
the SET button.

;

5. Select [Print] with the c / d buttons, and press the SET button to start printing.

;

6. The printing starts and the figure shown on the right hand side appears.

[COMPLETE] will be displayed temporarily, reminding you that the printing procedure is

finished. If an error is detected during the connection

(i.e. a printer hardware problem) between camera and printer, [PRINT ERROR] will be displayed.

If an error is detected during the communication (i.e. wrong setting on the camera) between camera and printer, [ERROR] will be displayed.

The image printing may fail if the power to the camera is cut off.

EN-47