•Plug the SensorVac into a USB port or use supplied battery pack. •Remove cover from battery pack and insert batteries as shown inside battery pack.
Battery Pack
Getting started
Step 1: Set up your camera to be cleaned
Refer to the Appendix of this guide for step by step instructions on putting your camera into
If you don’t see your camera in the appendix go to www.delkin.com/clean or refer to your camera’s manual.
Caution: Review your camera’s manual for any cautionary notes. Please follow any and all instruction for sensor cleaning as stated in the camera’s manual.
Step 2: Inspect with SensorScope
Start by removing the end caps from the SensorScope. Hold the camera in one hand and hold the SensorScope up to the camera’s lens mount area. Please note that the SensorScope is not made to attach to the camera like a lens and it will fit on the lens mount differently for each camera. Turn on the SensorScope by pressing the power button located on the top side of the battery compartment.
8