Canon Digital Rebel XTi – 400D •Make sure the battery is fully charged.
•Set the mode dial to M and turn the power on.
•Press the Menu button and use the arrow buttons to select Sensor Cleaning located in the tools menu.
•Press the Set button.
•Use the arrow buttons to select OK and press the Set button. •The mirror will lock up and the shutter will remain open until the power is turned off.
•Remove the camera lens.
•Turning the power off will reset the mirror and shutter.
Canon 5D
•Make sure the battery is fully charged and turn the power on. •Press the Menu button and use the dial to select Sensor Cleaning located in the tools menu.
•Press the Set button.
•Use the dial to select OK and press the Set button.
•The mirror will lock up and the shutter will remain open until the power is turned off.
•Remove the camera lens.
•Turning the power off will reset the mirror and shutter.
Canon 10D
•Make sure the battery is fully charged.
•Set the mode dial to M and turn the power on.
•Press the Menu button and use the dial to select Sensor Clean located in the tools menu.
•Press the Set button.
•Use the dial to select OK and press the Set button.
•The mirror will lock up and the shutter will remain open until the power is turned off.
•Remove the camera lens.
•Turning the power off will reset the mirror and shutter.
15