Yamaha RX-497 owner manual FCC Information for US customers

Page 3

IMPORTANT SAFETY INSTRUCTIONS

FCC INFORMATION (for US customers)

1IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.

2IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA.

3NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices.

This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices.

Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by the interference.

Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial type cable.

If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA 90620.

The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.

ii

Page 2 Page 4
Image 3
Page 2 Page 4
Contents RX-497 Serial No Important Safety InstructionsFCC Information for US customers Pour LES Consommateurs Canadiens For Canadian CustomersContents Supplied Accessories FeaturesFront panel Controls and FunctionsFM/AM, XM ANT Antenna EDIT, Search ModeTUN Tuning MODE/DISP Display VolumePTY Hold Front panel displayEurope model only DVD DTV/CBL VCR MD/TAPE Tuner PhonoVoltage Selector AC Outlets SwitchedRear panel Asia and General models onlyStandby Remote controlPower BandSleep Volume +Srch Search Mode Code SETInstalling batteries in the remote control Using the remote controlHandling the remote control Connections Unscrew the knob Connecting speakersConnecting the banana plug Tighten the knob to secure the wireConnecting the AM and FM antennas Outdoor AM antennaGround GND terminal Release the tab Connecting the AM loop antennaInward to the on position to turn on Power of this unitTurning on and off this unit Press Master ON/OFF on the front panelPlay the source Front panel Remote controlPlaying and Recording Playing a sourceAdjusting the Loudness control Adjusting the tonal qualityAdjusting the Balance control Using the Pure Direct buttonRecording a source Off Using the sleep timerMuting the sound output Press Mute on the remote control to mute the sound outputMute indicator flashes in the front panel display Mute indicator disappears from the front panel displayFM or AM appears in the front panel display FM/AM TuningAutomatic tuning Press TUNING/CH l / h once to begin automatic tuningManual tuning Manual tuning is effective when station signals are weakHold down the button to continue tuning search Automatic preset tuning Press TUNING/CH l / h once to begin automatic preset tuningFM appears in the front panel display Press and hold Memory on the front panel Customized automatic preset tuningPress TUNING/CH l / h on the front panel to Begin automatic preset tuningPress Memory on the front panel Manual preset tuningFlashes Selecting preset stationsExchanging preset stations Press Edit on the front panel againInformation from XM Satellite Radio, Inc XM Satellite Radio TuningWhat is XM Satellite Radio? XM Satellite Radio connectionsControls on the front panel XM Satellite Radio functionsNumber Zone 2 remote control sold separately onlyPreset ALLALL CH Search appears in the front panel display Activating XM Satellite RadioBasic XM Satellite Radio operations XM Satellite Radio search modes All Channel Search modeCAT Search appears in the front panel display Category Search modePreset Search mode Preset Search appears in the front panel displaySetting XM Satellite Radio preset channels Direct Number Access modePress Memory on the front panel or on the remote control Preset channel group letter appears Advanced Setup Changing the Advanced Setup menu parametersAdvanced Setup menu parameters Switching the remote control ID Control ID Function Code number This unit’s SettingSee page 35 for a complete list of available parameters Connecting the Zone 2 components Multi-room configuration and connectionsZone Press Zone 2 Control on the front panel Zone 2 indicator flashes in the front panel displayControlling Zone Press Zone 2 ON/OFF on the front panel to turn on ZoneControlling other components Remote Control FeaturesControl area Controlling this unitVCR Controlling other componentsSource Category Code Library Setting remote control codesRemote control code default settings Default Input Component ManufacturerGeneral TroubleshootingTuner Function properly Remote controlXM Satellite Radio Does not work norSpecifications MD recorder DVD playerCD player CD recorderThis product mainly uses lead-free solder RX-497/RX-397 Example of Antenna Grounding
Related manuals
Manual 53 pages 44.23 Kb

RX-497 specifications

The Yamaha RX-497 is a noteworthy stereo receiver that combines classic design with modern features, appealing to both audiophiles and casual listeners alike. This receiver is celebrated for its reliability and performance, setting a benchmark for home audio systems.

One of the standout features of the RX-497 is its power output. With 100 watts per channel at 8 ohms, it is capable of delivering robust and dynamic sound, ensuring that users can enjoy their favorite music or movies with clarity and depth. The receiver also supports a wide frequency response of 20 Hz to 20 kHz, allowing it to reproduce a comprehensive range of audio frequencies, from deep bass to crisp highs.

The RX-497 integrates advanced technology, including Yamaha’s own Natural Sound concept. This technology is designed to provide a realistic and immersive sonic experience, making it feel as though the listener is right in the middle of the performance. High-quality components within the receiver are selected to minimize distortion and deliver pure sound.

Another interesting aspect of the RX-497 is its versatility in connectivity. The receiver features multiple inputs, including video inputs and various audio sources, enabling users to connect numerous devices such as CD players, cassette decks, and turntables. The inclusion of a phono input is particularly beneficial for vinyl enthusiasts who wish to enjoy their records with high fidelity.

The RX-497 also showcases an easy-to-use tuning system, boasting a built-in FM/AM tuner with preset memory capabilities. This allows users to store their favorite radio stations for quick access and enjoy seamless listening without the hassle of manual tuning.

In terms of design, the Yamaha RX-497 features a clean and classic aesthetic, complemented by a beautifully lit display and ergonomically designed controls. This intuitive layout enhances user experience, making it simple for users to navigate settings and adjust volume levels.

Finally, the RX-497's build quality is a testament to Yamaha’s commitment to excellence. Constructed to withstand the test of time, it’s an investment in sound quality that offers enduring performance. Overall, the Yamaha RX-497 stands as a strong contender in the market of stereo receivers, blending powerful sound with user-friendly features, making it a preferred choice for many audio enthusiasts.
Top Page Image Contents