Yamaha RX-497 owner manual Specifications

Page 49

SPECIFICATIONS

AUDIO SECTION

• Minimum RMS Output Power

 

 

(8 Ω , 20 Hz to 20 kHz, 0.04% THD)

75 W + 75 W

• Dynamic Power (IHF)

 

 

(8/6/4/2 Ω)

105/125/150/178 W

• Maximum Output Power [Europe model only]

 

(1 kHz, 0.7% THD, 4 Ω)

105 W

• IEC Output Power [Europe model only]

 

 

(1 kHz, 0.04% THD, 8 Ω)

84 W

• Power Band Width

 

 

(0.08% THD, 35 W, 8 Ω)

10 Hz to 50 kHz

• Damping Factor (SPEAKERS A)

 

 

20 Hz to 20 kHz, 8 Ω

150 or more

• Maximum Output Power (EIAJ)

 

 

[Asia and General models only]

 

 

(1 kHz, 10% THD, 8 Ω)

115 W

• Maximum Input Signal

 

 

PHONO (1 kHz, 0.04% THD)

70 mV or more

CD, etc. (1 kHz, 0.04% THD)

2.2 V or more

• Frequency Response

 

 

CD, etc. (20 Hz to 20 kHz)

0 ± 0.5 dB

CD, etc. PURE DIRECT ON (10 Hz to 100 kHz)

0 ± 1.0 dB

• RIAA Equalization Deviation

 

 

PHONO

± 0.5 dB

• Total Harmonic Distortion

 

 

PHONO to OUT (REC)

 

 

(20 Hz to 20 kHz, 3 V)

0.02% or less

CD, etc. to SPEAKERS

 

 

(20 Hz to 20 kHz, 35 W, 8 Ω)

0.02% or less

• Signal to Noise Ratio (IHF-A Network)

 

 

PHONO (5 mV input shorted)

82 dB or more

CD, etc. (185 mV input shorted)

108 dB or more

• Residual Noise (IHF-A Network)

 

 

PURE DIRECT ON

100 µV

• Gain Tracking Error (0 to –60 dB)

2 dB or less

• Input Sensitivity/Input..................................................................Impedance

2.5 mV/47 kΩ

PHONO

 

CD, etc

185 mV/47 kΩ

• Output Level/Output Impedance

185 mV/1.2 kΩ or less

OUT (REC)

SUB WOOFER OUTPUT

4 V/1.2 kΩ

ZONE 2 OUTPUT

185 mV/1.2 kΩ

• Headphone Output/Impedance

 

 

(Input 1 kHz,....................................................................185 mV, 8 Ω , 0.015% THD)

0.47 V/390 Ω

CD, etc.

 

• Channel Separation

 

 

CD, etc. (5.1 kΩ input shorted, 1/10 kHz)

65/50 dB or more

• Tone Control Characteristics

 

 

BASS

 

 

Boost/Cut (20 Hz)

±10 dB

Turnover Frequency

350 Hz

TREBLE

 

 

Boost/Cut (20 kHz)

±10 dB

Turnover Frequency

3.5 kHz

• Continuous Loudness Control

 

 

Attenuation (1 kHz)

–30 dB

VIDEO SECTION

• Video Signal Type

 

[U.S.A., Canada and General models]

................................ NTSC

[Other models]

PAL

• Signal to Noise Ratio

50 dB or more

• Frequency Response (MONITOR OUT)

 

Composite

5 Hz to 10 MHz, –3 dB

FM SECTION

• Tuning Range

 

[U.S.A. and Canada models]

........................... 87.5 to 107.9 MHz

[Asia and General models]

87.5/87.50 to 107.9/108.00 MHz

[Other models]

87.50 to 108.00 MHz

• Usable Sensitivity (IHF)

1.0 µV (11.2 dBf)

• Signal to Noise Ratio (IHF)

 

Mono/Stereo

76 dB/70 dB

• Harmonic Distortion (1 kHz)

 

Mono/Stereo

0.2%/0.3%

• Stereo Separation (1 kHz)

45 dB

• Frequency Response

20 Hz to 15 kHz, +0.5/–2 dB

AM SECTION

• Tuning Range

 

[U.S.A. and Canada models]

.............................. 530 to 1710 kHz

[Asia and General models]

530/531 to 1710/1611 kHz

[Other models]

531 to 1611 kHz

• Usable Sensitivity

300 µV/m

GENERAL

• Power Supply

 

 

[U.S.A. and Canada models]

.............................. AC 120 V, 60 Hz

[Asia model]

AC 220/230-240 V, 50/60 Hz

[General model]

AC 110/120/220/230-240 V, 50/60 Hz

[Australia model]

AC 240 V, 50 Hz

[Europe model]

AC 230 V, 50 Hz

• Power Consumption

180 W

• Standby Power Consumption

.................................................

0.1 W

• Maximum Power Consumption [General model only]

(8 Ω , 1 kHz, 10% THD)

400 W

• AC Outlets

 

 

[Australia model]

1 (Total 100 W maximum)

[General model]

2 (Total 50 W maximum)

[Other models]

2 (Total 100 W maximum)

• Dimensions (W x H x D)

435 x 151 x 308 mm

 

 

(17-1/8” x 5-15/16” x 12-1/8”)

• Weight

8.7 kg (19 lbs. 3 oz.)

* Specifications are subject to change without notice.

INFORMATION

ADDITIONAL

 

 

45

Page 48 Page 50
Image 49
Page 48 Page 50
Contents RX-497 Serial No Important Safety InstructionsFCC Information for US customers Pour LES Consommateurs Canadiens For Canadian CustomersContents Supplied Accessories FeaturesFront panel Controls and FunctionsTUN Tuning MODE/DISP Display EDIT, Search ModeVolume FM/AM, XM ANT AntennaEurope model only Front panel displayDVD DTV/CBL VCR MD/TAPE Tuner Phono PTY HoldRear panel AC Outlets SwitchedAsia and General models only Voltage SelectorPower Remote controlBand StandbySrch Search Mode Volume +Code SET SleepUsing the remote control Installing batteries in the remote controlHandling the remote control Connections Connecting the banana plug Connecting speakersTighten the knob to secure the wire Unscrew the knobOutdoor AM antenna Connecting the AM and FM antennasGround GND terminal Release the tab Connecting the AM loop antennaTurning on and off this unit Power of this unitPress Master ON/OFF on the front panel Inward to the on position to turn onPlaying and Recording Front panel Remote controlPlaying a source Play the sourceAdjusting the Balance control Adjusting the tonal qualityUsing the Pure Direct button Adjusting the Loudness controlRecording a source Off Using the sleep timerMute indicator flashes in the front panel display Press Mute on the remote control to mute the sound outputMute indicator disappears from the front panel display Muting the sound outputAutomatic tuning FM/AM TuningPress TUNING/CH l / h once to begin automatic tuning FM or AM appears in the front panel displayManual tuning is effective when station signals are weak Manual tuningHold down the button to continue tuning search Press TUNING/CH l / h once to begin automatic preset tuning Automatic preset tuningFM appears in the front panel display Press TUNING/CH l / h on the front panel to Customized automatic preset tuningBegin automatic preset tuning Press and hold Memory on the front panelPress Memory on the front panel Manual preset tuningExchanging preset stations Selecting preset stationsPress Edit on the front panel again FlashesWhat is XM Satellite Radio? XM Satellite Radio TuningXM Satellite Radio connections Information from XM Satellite Radio, IncControls on the front panel XM Satellite Radio functionsPreset Zone 2 remote control sold separately onlyALL NumberALL CH Search appears in the front panel display Activating XM Satellite RadioBasic XM Satellite Radio operations XM Satellite Radio search modes All Channel Search modePreset Search mode Category Search modePreset Search appears in the front panel display CAT Search appears in the front panel displayDirect Number Access mode Setting XM Satellite Radio preset channelsPress Memory on the front panel or on the remote control Preset channel group letter appears Changing the Advanced Setup menu parameters Advanced SetupAdvanced Setup menu parameters Control ID Function Code number This unit’s Setting Switching the remote control IDSee page 35 for a complete list of available parameters Multi-room configuration and connections Connecting the Zone 2 componentsZone Controlling Zone Zone 2 indicator flashes in the front panel displayPress Zone 2 ON/OFF on the front panel to turn on Zone Press Zone 2 Control on the front panelControl area Remote Control FeaturesControlling this unit Controlling other componentsVCR Controlling other componentsRemote control code default settings Setting remote control codesDefault Input Component Manufacturer Source Category Code LibraryGeneral TroubleshootingTuner XM Satellite Radio Remote controlDoes not work nor Function properlySpecifications CD player DVD playerCD recorder MD recorderThis product mainly uses lead-free solder RX-497/RX-397 Example of Antenna Grounding
Related manuals
Manual 53 pages 44.23 Kb

RX-497 specifications

The Yamaha RX-497 is a noteworthy stereo receiver that combines classic design with modern features, appealing to both audiophiles and casual listeners alike. This receiver is celebrated for its reliability and performance, setting a benchmark for home audio systems.

One of the standout features of the RX-497 is its power output. With 100 watts per channel at 8 ohms, it is capable of delivering robust and dynamic sound, ensuring that users can enjoy their favorite music or movies with clarity and depth. The receiver also supports a wide frequency response of 20 Hz to 20 kHz, allowing it to reproduce a comprehensive range of audio frequencies, from deep bass to crisp highs.

The RX-497 integrates advanced technology, including Yamaha’s own Natural Sound concept. This technology is designed to provide a realistic and immersive sonic experience, making it feel as though the listener is right in the middle of the performance. High-quality components within the receiver are selected to minimize distortion and deliver pure sound.

Another interesting aspect of the RX-497 is its versatility in connectivity. The receiver features multiple inputs, including video inputs and various audio sources, enabling users to connect numerous devices such as CD players, cassette decks, and turntables. The inclusion of a phono input is particularly beneficial for vinyl enthusiasts who wish to enjoy their records with high fidelity.

The RX-497 also showcases an easy-to-use tuning system, boasting a built-in FM/AM tuner with preset memory capabilities. This allows users to store their favorite radio stations for quick access and enjoy seamless listening without the hassle of manual tuning.

In terms of design, the Yamaha RX-497 features a clean and classic aesthetic, complemented by a beautifully lit display and ergonomically designed controls. This intuitive layout enhances user experience, making it simple for users to navigate settings and adjust volume levels.

Finally, the RX-497's build quality is a testament to Yamaha’s commitment to excellence. Constructed to withstand the test of time, it’s an investment in sound quality that offers enduring performance. Overall, the Yamaha RX-497 stands as a strong contender in the market of stereo receivers, blending powerful sound with user-friendly features, making it a preferred choice for many audio enthusiasts.
Top Page Image Contents