Yamaha RX-497 owner manual Basic XM Satellite Radio operations

XM SATELLITE RADIO TUNING

Basic XM Satellite Radio operations

								2
ZONE 2 ON/OFF							FM/AM	l TUNING/CH h
										PURE DIRECT	MD/TAPE MONITOR
ZONE CONTROL							EDIT	MEMORY TUN MODE/DISP
MASTER											16
A/B/C/D/E	1	2	3	4	5	6	7	8	VOLUME	20	12
										26	8
INPUT		BASS		TREBLE		BALANCE		LOUDNESS
MAIN ZONE									40		4
PHONES	SPEAKERS
ON/OFF										60	2

∞0

-dB

1

1Rotate the INPUT selector on the front panel (or press XM on the remote control) to select XM as the input source.

The XM information (channel number/name, category or artist name/song title) for the currently selected channel appears in the front panel display.

INPUT

XM

or

Front panel Remote control

y

Selecting XM as the input source automatically recalls the previously selected channel.

2Press DISP on the front panel (or DISPLAY on the remote control) repeatedly to toggle between the following channel information display modes.

TUN MODE/DISP

or DISPLAY

AUTO/MAN'L
Front panel	Remote control

Channel name

Channel number

Channel category

Artist name

Song title

When the channel number and the channel name are displayed:

When the channel category is displayed:

When the artist name and the song title are displayed:

y

•Up to 14 alphanumeric characters can be shown in the front panel display at once. If the information contains more than 14 characters, the information scrolls from the right to the left.

•If the information contains a character that cannot be recognized by this unit, the character will be shown with an underbar “_”.

Note

If a status message or an error message appears in the front panel display, see “XM Satellite Radio” on page 44.

30