Bose VS-1 manual VCR CBL-SAT Other Connection Type, Video Quality

For an S-Video Connection Between Your TV and the VS-1

Choosing connection types for your video sources

If you connected your TV to the VS-1 using an S-Video cable, you can only use S-Video and Composite connections for source inputs even though a source may have compo- nent output connections.

1. Examine the rear panel of all your source devices to determine what types of video output connectors they have.

2.In the following table, place a check next to the type of video input connection you

plan to use for each of your video sources. Choose the type of connection that pro- vides the highest level of video image quality. We recommend using an S-Video connection if it is available.

If any of your sources do not have an S-Video jack, you can use a Composite connection. Remember, the VS-1 converts this up to S-Video format.

DO NOT USE

Connecting your sources to the VS-1

After obtaining the cable(s) you need:

1.Plug one end of the video cable into the appropriate jack on the rear of your video device.

2.Plug the other end of the video cable into the appropriate Video INPUT jack(s) on

the VS-1.

3.Turn to “Source Audio Connections” on page 14.

DO NOT USE

11