Maintaining Your VS-1
Cleaning
•Use only a soft, dry cloth to clean the outside of the
•Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives.
•Do not allow liquids to spill into any openings.
•Do not use any sprays near the
Troubleshooting
Problem | What to do |
|
|
System will not turn on | • Make sure the DC output cable from the media center power supply is plugged into the |
| and that the |
| • Make sure the media center power supply is plugged into an AC receptacle. |
|
|
No picture on TV | • Make sure the |
| • Make sure you connected your TV to the TV output connector on the |
| • If you connected the |
| the component output in your media center. See “Updating the system software” on page 16. |
| • Make sure you have selected the correct video input on your TV. |
| • Run the software update disc to make sure your system has been enabled to operate the |
|
|
The wrong picture | • Make sure your sources are connected to the appropriate |
appears on my TV for | • Make sure the Serial Data plug from the |
the source I selected | • Make sure you have selected the correct video input on your TV. |
| • Run the software update disc to make sure your system has been enabled to operate the |
|
|
Some sources do not | • Make sure your sources are connected to the appropriate |
appear on my TV | • Make sure you have not used a source that outputs a video format that is higher in quality than |
| what your TV can accept. |
| • If you are using both high definition and standard definition sources, make sure you are using a |
| TV input that can handle multiple formats (480i to 1080i). |
|
|
I see a picture on my TV | • You are experiencing a feature that allows you to view the video portion of a program on your |
even though I selected | TV while listening to the audio portion from another source. For example, you can watch a ball |
an audio source | game while listening to the program audio from a local radio station. |
(Stored, FM, AM, CD) |
|
|
|
19