Texas Instruments MC-1000WU-20A manual Important Notice

Page 2

IMPORTANT NOTICE

Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability.

TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements.

CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (ªCRITICAL APPLICATIONSº). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER'S RISK.

In order to minimize risks associated with the customer's applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards.

TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI's publication of information regarding any third party's products or services does not constitute TI's approval, warranty or endorsement thereof.

Copyright 1998, Texas Instruments Incorporated

Image 2
Contents MC-1000WU-20A High-Resolution Camera Users Guide Important Notice Read This First About This ManualTrademarks If You Need Assistance Page Contents Figures TablesGeneral Description TopicFeatures ±1. MC-1000WU-20A Interface Options and Mode Selection IntroductionPhysical Description Equipment Supplied Equipment Required But Not Supplied Specifications Specifications ±1. Specifications±1. Specifications Interface Circuit ±1. Input Interface Circuit of VD, HD, and MCKInstallation ±1. Auto Iris Connector Pin Assignment Interface Assignments±4. AUX Connector Pin Assignment Installation Procedure Mounting the CameraPost-Installation Test Installation Operation General Operating Procedures Turn-On ProcedureFigure B±1. TV Internal Mode External Operation See Appendix BOperation CCD Circuit Description CCD Array Cleaning Instructions Cleaning Functional Block Diagram Functional Block Diagram Figure A±1. Functional Block DiagramTiming Diagrams Timing Diagrams Figure B±1.TV Internal Mode see NoteFigure B±2.TV External Mode Figure B±5.Shutter Internal Mode Figure B±6.Shutter External Mode Figure B±8.HD Input Waveform Important Notice