TRENDnet TVIP600 manual Fixed IP, Dynamic, Address, PPPoE

TV-IP600/W Wireless Network Camera

TCP/IP

•IP Address Mode: Click a radio button to define the IP Address Mode:

Fixed IP	You can select this option and enter the IP address directly. The default
	settings are:
	• IP Address – 192.168.10.30
	• Subnet Mask – 255.255.255.0
	• Default Gateway – 0.0.0.0
Dynamic	If your network uses a DHCP server, select this option. According to this
Address	setting, the Camera will be assigned an IP address from the DHCP server
(DHCP)	automatically. If choosing this option please ensure that your DHCP Server
	is set to assign the Camera a Static IP address every time your Camera
	starts up.
PPPoE	If your application requires a direct connection from an ADSL modem
	through the Camera’s RJ-45 LAN port, click this option and enter the User
	ID and Password in the respective fields. (You should have an ISP PPPoE
	account.) The Camera will then be issued an IP address from the ISP as it
	starts up.

•DNS IP Address: A DNS (Domain Name System) Server is an Internet service that translates domain names into IP addresses. Enter at least one DNS IP Address in this section.

•Dynamic DNS: Choose whether to Enable or Disable Dynamic DNS by clicking the respective radio button. The Dynamic DNS service allows you to alias a dynamic IP address to a static hostname in any domain, allowing your Camera to be accessed more easily from various locations on the Internet.

•Second HTTP Port: Some networks are configured to use a different port than the default port number of 80 for HTTP traffic. If your network uses a different port than 80 for HTTP communication, click the Enable radio button and type the port number used for HTTP communication on your network in the Port Number field.

•UPnP: UPnP is a pervasive peer-to-peer architecture type used for the network connectivity of intelligent appliances and PCs of all form factors. Click the Enable radio button to enable this function on your Camera.

47