TV-IP600/W Wireless Network Camera
2
Installing the Camera
The camera is intended for indoor use. The camera, the power adapter and power source should be protected from water and moisture, excessive heat, direct sunlight and cold. Make sure the power adapter and its cord and the Ethernet cable are safely arranged so they do not create a tripping hazard and will not be disturbed by people or objects moving past.
Attach the Metal Plate
To attach the metal plate carry out the following:
1.Remove the two rubber pads under the base of the Camera.
2.Slide the metal plate onto the base of the Camera, making sure that the two holes on the base of the Camera align with the two screw holes on the base of the Camera.
3.Secure the metal plate to the base of the Camera with the two screws provided.
4.The Camera can now be mounted to the ceiling or a wall. See the diagram below for more information.
1.Install the Camera to the ceiling using the two ceiling screws (n); Or,
2.Install the Camera using the two wall screws (o).
8