TRENDnet TVIP522P manual Action

Page 40

TV-IP522P ProView Megapixel Internet Camera

Action

The Action menu contains four sub-menus that provide the Recording, Snapshot, Digital output and RS-485 setting.

Recording

The Recording Setup menu is used to determine when and how digital video recordings are handled. Recordings can be saved to an SD memory card (requires the insertion of an SD card into the camera) or to a shared folder on a secure server. The recording can be scheduled or event based using motion detection as the trigger. One option allows resolution of recordings to be adjusted down to use less hard disk space. Recording can be stopped when the hard disk is full or choose the option to overwrite the disk to replace old recordings.

Enable recording

Tick this checkbox to enable the recording feature. There are two options available for recording, SD Card or Samba network drive.

Record to

Click a radio button to specify where the recording should be saved. The available options are SD Card or Samba network drive.

SD Card

This option specifies that the recording will be saved to the SD Card in the SD Slot on the side of the camera.

Samba network drive

This option specifies that the recording will be saved to a Samba drive on your network.

Samba Auth

Use the drop-down menu to specify whether a user name and password is required to access the Samba drive. If no user name or password is required to access the Samba drive, choose Anonymous from the drop-down menu. If a user name and password is required to access the Samba drive, choose the Account option from the drop-down menu and configure the parameters as described below:

•User Name- Type the user name required to access the Samba drive.

•Password- Type the password required to access the Samba drive.

•Password Confirm- Type the password required to access the Samba drive for verification.

•Server- Type the name or IP address of the server your Samba drive is on.

•Shared Folder- Enter the path that points to the shared server.

Click the Test button to check that the TV-IP522P can connect to the Samba drive.

40

Image 40

Contents Page Contents Limited Warranty ………………………………………………………………………………...73 Playing Video Files on a ComputerAbout This User’s Guide Before You StartPacking List TV-IP522P ProView Megapixel Internet CameraComputer System RequirementsNetwork Default Settings Default configuration settings UsernameFeatures and Benefits IntroductionCamera Hardware Components Front and Side ComponentsRear Panel Components LED IndicatorsRear Panel view of TV-IP522P Auto-Iris Connector DC drive GpioInstalling the Camera Attach Camera to StandConnect Power using AC Adapter and Power On Camera Connect Ethernet CableReset Camera SD Card Slot SD Card SlotLaunching the SetupWizard SetupWizardSetupWizard- Install Your Camera SetupWizard- Select Your Camera SetupWizard- Authentication SetupWizard- Change Password PPPoE SetupWizard- Select a Connection OptionFixed IP SetupWizard- Select a Connection Option- PPPoE SetupWizard- Select a Connection Option- Dhcp SetupWizard- Select a Connection Option- Fixed IP SetupWizard- Other Settings SetupWizard- Setting Up The Camera SetupWizard- Camera RestartSetupWizard- Complete Using the Camera Web Manager Accessing the Camera Video DisplayWeb Manager and Live Video Display LoginCamera video display in web manager Video Display Control Live Video Display User InterfaceLive Video Display user interface Event Indicators Recording, Snapshot, Audio and Digital Output ControlsCamera Setup SetupWizard menu in Setup directoryDevice Management Admin Password SettingDevice Management menu Add User Account Device SettingUser List Enable Daylight Saving Time and DateTime Zone Auto Daylight SavingSynchronize with NTP Server LAN IP Settings Network SettingsNetwork Setup menus UPnP UPnP port forwardingPPPoE Port DetailSetting up Video & Audio Reset to Default Video and Audio SettingsMirror Night Mode Audio SetupCamera Environment Placed LocationAction Scheduling Snapshot PreferencesA p s h o t I g g e r Enu Send to Digital Output Digital OutputRS-485 RS-485 supportMotion Detection Motion detection menu drawn area in redRestore To Factory Defaults Reboot DeviceTool Load From Local Hard DriveFirmware Upgrade Firmware Upgrade WindowDevice Information LogDevice Information display Camera LogIPView Pro Launching IPView Pro 2.0 for the first timeAdd a camera for monitoring TV-IP522P ProView Megapixel Internet Camera IPView Pro 2.0 User Interface Below is a general description of the user interfaceDisplay Controls Snapshot, recording and audio controlsLaunch IPCamPlayer to Adding a Camera Camera configuration with IPView ProTo add a camera Removing a Camera Click Delete Selected CameraCreate Schedule Templates Schedule Recording with IPView ProClick Create Template to make a new schedule Setup Motion Detection and Digital Input with IPView Pro IPView Pro 2.0 Recording Options IPView Pro 2.0 Miscellaneous Options Playing Video Files on a Computer Load Saved Video Files IPCamPlayer User InterfacePlay Video Files Install ffdshow FfdshowTV-IP522P ProView Megapixel Internet Camera TV-IP522P ProView Megapixel Internet Camera TV-IP522P ProView Megapixel Internet Camera TV-IP522P ProView Megapixel Internet Camera TV-IP522P ProView Megapixel Internet Camera Technical Specifications CameraLED Port Settings Connector Pin Assignment Terminal ApplicationInterface Schematic RS485B Swivel standLimited Warranty Warranty FCCTV-IP522P ProView Megapixel Internet Camera TV-IP522P PoE Internet Camera Server with 2-way Audio