TRENDnet TVIP522P Tool, Load From Local Hard Drive, Restore To Factory Defaults, Reboot Device

Page 45

TV-IP522P ProView Megapixel Internet Camera

Tool

The Tool menu contains two sub-menus that provide the Backup and Restore and Firmware upgrade.

Back Up and Restore Camera Settings

Save System Settings/Restore/Reboot menu

Save To Local Hard Drive

To save configuration settings for the camera to a file on a local hard disk, click the Save Configuration button. A prompt appears to confirm that you want to save the file. Choose the location and save the file to load the same settings.

Load From Local Hard Drive

To load a previously saved configuration settings file, click the Browse button to Load From Local Hard Drive to locate the file, and then click the Load Configuration button. It will take a few seconds to load the new settings. The camera will then restart.

Restore To Factory Defaults

To restore the camera to the factory default configuration settings, click the Restore Factory Defaults button. A prompt appears to confirm that you want to restore the default settings. Click OK to restore the settings.

Reboot Device

To perform a simple restart of the camera, click the Reboot Device button.

45

Image 45

Contents Page Contents Playing Video Files on a Computer Limited Warranty ………………………………………………………………………………...73Before You Start About This User’s GuidePacking List TV-IP522P ProView Megapixel Internet CameraSystem Requirements ComputerNetwork Default configuration settings Username Default SettingsIntroduction Features and BenefitsFront and Side Components Camera Hardware ComponentsLED Indicators Rear Panel ComponentsRear Panel view of TV-IP522P Gpio Auto-Iris Connector DC driveAttach Camera to Stand Installing the CameraConnect Ethernet Cable Connect Power using AC Adapter and Power On CameraReset Camera SD Card Slot SD Card SlotSetupWizard Launching the SetupWizardSetupWizard- Install Your Camera SetupWizard- Select Your Camera SetupWizard- Authentication SetupWizard- Change Password SetupWizard- Select a Connection Option PPPoEFixed IP SetupWizard- Select a Connection Option- PPPoE SetupWizard- Select a Connection Option- Dhcp SetupWizard- Select a Connection Option- Fixed IP SetupWizard- Other Settings SetupWizard- Camera Restart SetupWizard- Setting Up The CameraSetupWizard- Complete Accessing the Camera Video Display Using the Camera Web ManagerLogin Web Manager and Live Video DisplayCamera video display in web manager Live Video Display User Interface Video Display ControlLive Video Display user interface Recording, Snapshot, Audio and Digital Output Controls Event IndicatorsSetupWizard menu in Setup directory Camera SetupAdmin Password Setting Device ManagementDevice Management menu Device Setting Add User AccountUser List Time and Date Enable Daylight SavingTime Zone Auto Daylight SavingSynchronize with NTP Server Network Settings LAN IP SettingsNetwork Setup menus UPnP port forwarding UPnPPPPoE Port DetailSetting up Video & Audio Video and Audio Settings Reset to DefaultMirror Audio Setup Night ModeCamera Environment Placed LocationAction Snapshot Preferences SchedulingA p s h o t I g g e r Enu Send to Digital Output Digital OutputRS-485 support RS-485Motion detection menu drawn area in red Motion DetectionReboot Device Restore To Factory DefaultsTool Load From Local Hard DriveFirmware Upgrade Window Firmware UpgradeLog Device InformationDevice Information display Camera LogLaunching IPView Pro 2.0 for the first time IPView ProAdd a camera for monitoring TV-IP522P ProView Megapixel Internet Camera Below is a general description of the user interface IPView Pro 2.0 User InterfaceSnapshot, recording and audio controls Display ControlsLaunch IPCamPlayer to Camera configuration with IPView Pro Adding a CameraTo add a camera Click Delete Selected Camera Removing a CameraSchedule Recording with IPView Pro Create Schedule TemplatesClick Create Template to make a new schedule Setup Motion Detection and Digital Input with IPView Pro IPView Pro 2.0 Recording Options IPView Pro 2.0 Miscellaneous Options Playing Video Files on a Computer IPCamPlayer User Interface Load Saved Video FilesPlay Video Files Ffdshow Install ffdshowTV-IP522P ProView Megapixel Internet Camera TV-IP522P ProView Megapixel Internet Camera TV-IP522P ProView Megapixel Internet Camera TV-IP522P ProView Megapixel Internet Camera TV-IP522P ProView Megapixel Internet Camera Camera Technical SpecificationsLED Port Settings Terminal Application Connector Pin AssignmentRS485B Swivel stand Interface SchematicLimited Warranty FCC WarrantyTV-IP522P ProView Megapixel Internet Camera TV-IP522P PoE Internet Camera Server with 2-way Audio