TV-IP522P ProView Megapixel Internet Camera
RS-485
RS-485 control is used to enable use of external devices (such as motorized rotational or pan and tilt camera stand) operated through the I/O port.
Note: 485+/- of the I/O connector are used for RS-485. Refer to the manufacturer’s user manual for proper connection instructions.
RS-485 support
To use a RS-485 Pan/Tilt device, click to check the Support PAN-TILToption box. Choose the Protocol used for the device from the pull-down list. Check the remaining settings to make sure they are compatible with the RS-485 device. Refer to the manufacturer’s instructions included with the RS-485 device.
When the Pan/Tilt stand is properly connected and the RS-485 settings are compatible, the main user interface will include directional control arrows used for pan and tilt control of the stand.
Directional View Controls in the main User Interface
Home button Left click the round button labeled [+] at the center of the controls to return the camera to the Home position.
Pan / Tilt control Use your mouse and left click button to move the directional control in the right panel of the video display page and left click on the arrow to move the camera in that direction.
43
