Optoma Technology BX-AL133 user manual Addendum Adapter Plate, Contents

Page 16

User’s Manual

BX-AL133

Addendum: Adapter Plate

This attachment plate is designed to be installed onto a ceiling mounted projector. The location or orientation of the ceiling mount does not need to change.

Contents

 

Lens Plate

1

Lens Plate

 

 

1

(Bag) Projector Attachment Parts

 

 

1

Assembly Kit (Includes)

Ceiling Side (Top)

 

 

2

Plate Hook Assemblies

 

 

 

 

 

1 Chain (6 ft)

 

 

 

4

Chain Ends

 

 

 

4

Lens Mounting Assemblies

 

 

 

4

Sled Mounting Screws

 

 

 

2

Sled Safety Assemblies

 

 

 

1 Hex Key

 

 

Required Tools and Equipment

 

 

2 Ceiling Hooks (40 lbs Capacity Each)

 

1

Phillips Screwdriver

 

 

1

Pair of Pliers

 

 

1

Strong Pair of Scissors or Wire Cutters

 

Front

Holes For:

Projector and Ceiling Mount

Hooks

Lens Only

Motorized Sled

1.INSTALL PLATE HOOK ASSEMBLIES. Use the pliers to bend the closed-end of the hooks apart just enough to insert the end of the chain. Install the plate hook assemblies in the two holes. Place one hook end on the top side and then continue the assembly down in the order of nut, washer, lens plate, washer, lock washer and nut. Arrange the assembly so that the plate is in the center of the threaded hook shaft.

2.ATTACH LENS PLATE. Remove the projector from the ceiling and the ceiling mount adapter plate. Position the ceiling mount adapter plate over the lens plate and the projector. Line up the holes of the lens plate (labeled holes for projector and ceiling mount in the diagram above) with the holes of the ceiling mount and projector. Install the silver screws from the attachment parts bag.

Ceiling mount hardware may vary. If the provided screws are not long enough, purchase the longest metric M4 screws without exceeding the depth of the projector mounting holes for the greatest security.

3.MOUNT PROJECTOR ASSEMBLY. Securely connect the ceiling mount adapter, lens plate and projector assembly to the ceiling mount and then adjust the ceiling mount to provide the proper 16:9 image orientation in the center of your 2.35:1 screen.

For more information, please visit our website at:

User’s Manual

16

http://www.OptomaUSA.com

 

 

Image 16
Contents User’s Manual Safety Features and benefits IntroductionRemote IR Sensor Button Remote Control Getting to Know Your SystemPlanning for Projector Exhaust Plan Your InstallationChanging Orientation of Logo Plate Optional Mounting Sled to Shelf or Ceiling Line up the center line of lensSecuring the mounting plate Attaching the lens bracket to the adaptor platePower up the sled and set Lens in position SetupVerify centering Configuring the lens speed Attaching the lens to the bracketRemote Control and Motor Operation ButtonsRear Panel − Triggers and Sensors Cleaning and Maintenance Specifications Electrical CharacteristicsDimensions Warranty Contents Addendum Adapter PlateInstallation with Motorized Mount Addendum The Finished Product #ANADA