Ikelite Digital Housing
inst | ructi | on | ma nual |
#6154.50 for Fujifilm FinePix F50fd
Zoom
Dual IS Selector 
Shutter
Release
Lid
Snap
Power
Lens
Port
Lid
Snap
Congratulations on your purchase of an Ikelite Digital Camera Housing. Ikelite has over 40 years of experience in the underwater photographic and lighting market. Our products are designed and built in the USA by Ikelite for both the professional and amateur photographer.
The clear housing permits instant visual inspection of the camera and all sealing surfaces as well as complete monitoring of controls and camera LCD screens.
Ikelite Digital Housings are slightly negative in salt water for stability. This housing has been water pressure tested at the factory. Housing is pressure tested to 200’ (60m).
Front View
Thumb
Rest
Mode
Photo Mode
Playback
Control Button
Lanyard
Display 
Face Detection
Back2
Opening the Housing 1. Lid Snaps have a Lock.
To open, push Lid Snap Lock forward and lift as shown.
Keep pressure on the Lid
Snap so it does not fly open
quickly.
Some lid snaps have a lot of
spring tension once they go over center, have a firm grip on the lid snap. Lid Snaps may be opened one at a time.
Installing the Camera 1. Remove the back
from the housing. The mounting tray for the camera is secured to the
housing back. Position the camera
on the tray and secure it with the
mounting bolt which threads into the
camera’s tripod socket.
CAUTION:
Some camera tripod socket threads are plastic. The mounting tray bolt is metal. Do not cross thread or over tighten as you may damage the camera tripod socket threads.
2. Pull out on each housing control until it stops. This will get the controls out of the way for installing the camera.
4