InFocus M2100 manual Using the audio, Using the projector’s speakers, Connecting external speakers

Using the audio

Using the projector’s speakers

To use the projector’s speaker, connect your source to the Audio In Computer or Video connectors.

To adjust the volume, press the Volume buttons on the keypad or remote.

Troubleshooting Audio

If you aren’t hearing the audio, check the following:

•Make sure the audio cable is connected to the correct audio in connector, Computer or Video.

•Make sure the volume is turned up enough. Press the Volume button on the keypad or remote.

•Make sure you are connected to the corresponding audio in for your source.

•Make sure that you are connected to an audio out connector on the source as opposed to a line in or microphone connector.

•Adjust the audio source.

•If playing a video, make sure the playback has not been paused.

Connecting external speakers

The projector can be attached to external amplified speakers by connecting a 3.5mm stereo audio cable from the Audio Out connector on the projector to the amplified speakers. Alternatively, you can bypass the projector’s audio system and connect the audio directly from your source to a stereo or home theater system.

Connect audio cable

Adjust volume

External speakers with own power source

Speaker cable

23