Using LitePort (IN2114 & IN2116 only)
LitePort displays a slide show of JPEG images stored on a USB flash drive connected to the projector. This feature eliminates the need for a computer source and can be integrated with common wall plates and conference room input/output panels.
Image File Types
LitePort displays image files in JPEG format only (file extensions .JPEG and
.JPG). Other file types including PDF, BMP, TIFF, PNG, GIF, etc. are ignored.
Viewing a Slide Show
To view your pictures as a slide show, follow these steps:
1Connect a USB flash drive to your computer and copy JPEG files from your computer to the USB flash drive.
2Turn on your projector if needed.
3Remove the USB flash drive from your computer and plug it into the LitePort connector on the rear of the projector.
4The projector will start a slide show of the images found (if you see image thumbnails instead, see To Start the Slide Show section below).
5To go to the next image in the slide show, press the Down or Right arrow button on the projector keypad or remote. To go to the previous image, press the Up or Left arrow button.
Controlling LitePort
When you plug a USB flash drive into the projector's LitePort connector, the projector will scan the drive and then either start a slide show or show image thumbnails.
To stop the slide show and view thumbnails: Press the Select button during the slide show. In Thumbnails view, the name of the current folder, the current image number, and the total number of images in that folder are shown at the bottom of the screen. While viewing thumbnails, press the arrow but-
tons to scroll through the thumbnails, or press Select when an image is high- lighted to start the slide show, or press Select when a folder is highlighted to open that folder.
To start the slide show: While viewing thumbnails, press the arrow buttons to highlight a thumbnail, then press the Select button to start the slide show at the highlighted image.
To change the image during the slide show: Press the Down or Right button to go to the next image, or press the Up or Left arrow button to go to the previ- ous image (the slide show may also advance automatically depending on the value of the Next Slide setting; see the LitePort Menu section below for details).
To change to a different folder: While viewing thumbnails, press the arrow buttons to highlight the desired folder icon, then press the Select button (to go to the
To change LitePort settings: Press the Menu button during the slide show, or while viewing thumbnails (see the LitePort Menu section below for details).
Using the LitePort Menu
To show the LitePort menu, press the Menu button on the keypad or remote during the slide show, or while viewing thumbnails. To highlight a menu item, press arrow buttons. Then to do the action or change the setting, press Select. To remove the menu, press the Menu button again.
Rotate Picture: Rotates the current image by 90 degrees clockwise (rotation is temporary; the image returns to its original orientation when the USB flash drive is removed from the projector or when the projector is turned off).
Stop/Start Slideshow: Stops the slide show, or starts it at the selected thumb- nail (when the menu is not visible, you can also stop or start the slide show by pressing the Select button).
Go to Projector Main Menu: Removes the LitePort menu and displays the projector's main menu, where you can adjust the picture or change other projector settings.
37
