Samsung VP-D6050S(i) VP-D6040(i) Miscellaneous Information, Connecting to a TV Set Through a VCR

Miscellaneous Information

Connecting to Other Devices – TV and VCR

✤You can connect your device to a TV set directly or through a VCR to view your recordings and pictures on the TV screen, using the Multi-AV cable.

✤You can connect your device to a PC to copy or move your recordings and pictures to the hard disk drive, using the USB cable or the DV cable.

✤You can connect your device to other DV-enabled devices using the DV cable.

Connecting to a TV Set Through a VCR

✤If there are no input terminals for external devices on your TV set and a VCR is connected to your TV set using a coaxial cable, you can utilize the VCR to connect your camcorder to the TV set.

■To Connect to a VCR that is Connected to Your TV Set

■To Connect to a TV set

1.Connect the Multi-AV cable to your camcorder’s multi-AV jack.

2.Connect the Multi-AV cable to the external input terminal of your TV set by matching the colours of the terminals.

1.Connect the Multi-AV cable to your camcorder’s multi-AV jack.

2.Connect the Multi-AV cable to the External Inputs (LINE-IN) on the VCR by matching the colours of the terminals.

	Video input (Y)
VCR	Audio input (L)
	Audio input (R)	CAMCORDER
	S-VIDEO
	input
TV
ANTENNA		MULTI-AV

■To Play Back Recorded Video

1.Turn your TV on and select the external input source connected to your camcorder.

2.Locate the desired position on the tape using the

(REW) or (FF) button.

3.Press the (PLAY/STILL) button of the camcorder to start playback.

4.To stop the playback, press the (STOP) button.

Reference

Video input-	Audio input
	(left)-White Audio input
Yellow	(right)-Red
TV	Camcorder
	S-VIDEO input

MULTI-AV

3.Connect the TV and VCR using the coaxial

cable. Refer to the Video or TV’s instruction book for further connection details.

4.Set the input source of the VCR to the external input source connected to your camcorder.

■To Play Back Recorded Video

1.Turn your TV on and select the external input source that is connected to the VCR. Set the TV channel to view the VCR. 3 or 4 is most often used.

2.Locate the desired position on the tape using the (REW) or (FF) button.

3.Press the (PLAY/STILL) button of the camcorder to start playback.

4.To stop the playback, press the (STOP) button.

✤Some TV sets have LINE-IN input terminals instead of External Input terminals. Refer to the manufacturer’s instructions for detailed information on connecting external devices.

✤If a TV set has an S-VIDEO input terminal, you may use S-VIDEO for better quality.

✤If you use an S-VIDEO cable, you will need to connect an audio cable.

✤If only a mono audio input is available on the TV set, use the audio cable with the white plug.

Reference

✤If the VCR has an S-VIDEO input terminal, you may use S-VIDEO for better quality.

✤The S-VIDEO terminal transmits video only. Connect AUDIO cables for sound.

✤If only a mono audio input is available on the TV set, use the audio cable with the white plug.

7