Samsung VP-D352 manual VP-D353i/D354i/D355i

ENGLISH

Basic Recording

Self Record using the Remote Control (VP-D353(i)/D354(i)/D355(i) only)

✤The SELF TIMER function works only in Camera mode.

✤When you use the Self Timer function on the remote control, the recording begins automatically in 10 seconds.

VP-D353(i)/D354(i)/D355(i)

✤

✤

1.Set the Power switch to CAMERA.

2.Set the Mode switch to TAPE.

3.Press the SELF TIMER button until the appropriate indicator is displayed in the LCD screen.

4.Press the Start/Stop button to start the timer.

-Self Timer starts counting down from 10 with a beep sound.

-In the last one second of the countdown, the beep sound gets faster, then recording starts automatically.

-If you want to cancel the Self Timer function before recording, press the SELF TIMER button.

5.Press the Start/Stop button again when you wish to stop recording.

[ Notes ]

■Do not obstruct the remote control sensor by putting obstacles between the remote control and Camcorder.

■The remote control range is 4 ~5m (13 ~17 ft).

■The effective remote control angle is up to 30 degrees left /right from the centre line.

■Using a tripod is recommended for delayed recording.

1

3

œ

4

œ

■

■

■

■

43