Samsung VP-D352 manual Connecting to a TV which has no Audio and Video Input Jacks, Playback

ENGLISH

Playback

Connecting to a TV which has no Audio and Video Input Jacks

✤ You can connect your Camcorder to a TV through a VCR. ✤

1.	Connect the Camcorder to your VCR with the
	Audio/Video cable.
	■ The yellow jack: Video
	■ The white jack: Audio(L) - Mono
	■ The red jack: Audio(R)
2.	Connect a TV to the VCR.
3.	Set the Power switch to PLAYER.

VCR

S-Video input

Video input-Yellow
Audio input	■
(left)-White	■
Audio input
(right)-Red	■
	Camcorder

4.	Set the Mode switch to TAPE.
	(VP-D353(i)/D354(i)/D355(i) only)
5.	Turn on both the TV and VCR.
	■ Set the input selector on the VCR to Line.
	■ Select the channel reserved for your VCR on the
	TV set.
6.	Play the tape.

TV

Antenna

Audio/Video
	■
S-Video	■

Playback

✤ You can play the recorded tape in Player mode.

1. Connect a power source and set the Power switch to

PLAYER.

2. Set the Mode switch to TAPE. (VP-D353(i)/D354(i)/D355(i) only)

3. Insert the tape you wish to play back.

4. Using the / (REW/FF) buttons, find the first position you wish to play back.

5.Press the (PLAY/STILL) button.

■The images you recorded will appear on the TV after a few seconds.

■If a tape reaches its end while being played back, the tape will rewind automatically.

[ Notes ]

■The playback mode (SP/LP) is selected automatically.

■If the VCR has an S-Video input terminal, you may use S-Video for better quality.

■The S-Video terminal transmits video only. Connect audio cables for sound.

■If only a mono audio input is available on the TV set, use the audio cable with the white jack (Audio L).

✤

■

■

■

■

■

■

72